357 sizing

[Freightman]

Or like there of, I went to the range yesterday with my 357 Blackhawk and it did great except for a tad of leading , not bad. So I cast some boolits for it and the Lyman 170 SWC drops at .3595 I took a fired case and they fit with a slight bell. So I made up some dummies cases from the undersized cases and seated and crimped the cases as I would the ones I would shoot. They fit with out any sizing at all on the cases or the boolits, so I will just pan lube and see how they shoot when it stops snowing and being 0*.

[missionary5155]

Good morning
First measurement for me with any revolver is those pesky throats. How does that unsized boolit fit through the throats and are all 6 the same size ? Being a RBH (I have numerous in 41 mag) I would not be surprized that they are
#1 undersized for the barrel
#2 irregular in size
#3 sort of rough looking
But other than that they will shoot a long time and seldom fail to go bang.

[Freightman]

All fit the throats as all are the same size, right at the end you have to gently press it in but not much. I will see how they shoot when the snow stops.