Missouri Bullet / Glock 40cal

[catwrench]

hi guys i 'am new to forum was told you are the guys to talk to.what i have is a glock 20 with kkm conversion barrel for 40cal S&W which i want to start reloading cast bullets for,But can't seeem to find load data ,any pet loads you have? just so you know reloading now for 2years but just jacketed rounds, anyhow what i have are 180grain and 200 grain TCFP bullets for missouri bullet .i have bullseye,unqnic,hp38,aa5 , aa7 for powders any help here please.

[HighHook]

Welcome catwrench,
I shoot MB's out of my g20. 4.5-5.0gr Bullseye keeps it from being a safe queen...

[catwrench]

thanks for the input, gives me a good starting point. My i ask what you are running for your OAL?

[HighHook]

thanks for the input, gives me a good starting point. My i ask what you are running for your OAL?

The Lyman book says should be 1.1 but mine are at 1.125 for the 40

Dont push your MB hard and not to deep. Have fun...

[catwrench]

made up a few test rounds and oal at 1.135" ,will see if they cycle in glock first

[HammerMTB]

I am shooting 4.9 of 700X with a Lee 175TCFB. I took the BB off myself. It is loaded to 1.135, but I needed to throat a .40S&W bbl or shoot from a 10MM bbl to use that length. This load gives me Major PF for action games. Avg is about 980 FPS