lyman 318475 mold ?

[adrians]

hi , can anyone give me any info on the lyman #318475 mold?.
i have 3 or 4 older lyman data books but non of them give it a mention,
my lyman reloading handbook 46th edition states it was used in editions 39 thro 41. neither of which i have , can anyone help?,,,,,,,,please.
thanks ,adrians ,:twisted:[smilie=1::twisted:

[nanuk]

I have not found a reference to the 318475, but found a 316475

casts a boolit that looks like a squat 311466.

about 155gr. got this from Ol' Buffalo Bullet Mould Table

[nanuk]

I found the mould on ebay, and it fits with the pic on the table.

perhaps a custom diameter?

[adrians]

hi,yer nanuk thats the one i'm looking at .
here's a pic of the lyman 46th listing the mold.
the first pic is a little small but second shows it 1st colume 4th up,second colume shows editions it was used.
have a good one .adrians:twisted::coffee::evil:
(blow up pic 1?)

[bhn22]

It almost sounds like a "J" bore 8mm Mauser bullet, but a picture of the cavities would sure help. As far as that goes, it could also be some forgotten paper-patch .32 bullet. You might see if the seller would take pictures of the cavities for you. That would probably settle it right off.

[adrians]

well no pics but looking at the cav its a loverin design and the nose of the pill goes just past the alighnment pins in the blocks,i'm guessing its about a 180gr or bigger,
have a great thursday adrians:twisted::confused::evil: