32/40 Squib Load

[vp146b4]

Been looking for a mold to shoot my 32/40 Stevevns with squib loads indoors. I was told by the expienced shooters that I should get a 32359 mold and shoot with 3g of Unique. I've been looking for a long time for a 32359 without any luck. Does anybody have an idea for a lite bullet for indoor shooting?

[woody1]

Been looking for a mold to shoot my 32/40 Stevevns with squib loads indoors. I was told by the expienced shooters that I should get a 32359 mold and shoot with 3g of Unique. I've been looking for a long time for a 32359 without any luck. Does anybody have an idea for a lite bullet for indoor shooting?

If you haven't tried round balls for short range plinkers, you might try them. If you don't have a mould I'd try "0" buckshot with a good coating of Lee Alox. Works in my 32 Special. If that didn't work then run a "00" buck thru a sizer die. I shoot a lot of 375 round balls out of 38/357's after running them thru a .360 sizer. Try about 3-3.5 grains of Bullseye under 'em. Regards, Woody