Need help IDing old SAECO molds

[Toobroke]

Have run across a number of older SAECO and SAECO by Redding molds that I cannot find any info on. I emailed Redding over a week ago and they have not answered. If anyone can help I would appreciate it

SAECO by Redding 381

SAECO 901

SAECO by Redding 012

SAECO by Redding 051

SAECO by Redding 380

Thanks in advance

[BCall]

I believe the 380 is a 95 gr round nose bevel base, not sure about any of the others.

[c3d4b2]

To piggy back on this thread I have a SAECO mold that I have not been able to find any information for.

It is a SAECO 545

Thanks

[Toobroke]

Thanks BCall, I was able to confirm the 380--just as you described

[.30/30 Guy]

Saeco by Redding 012 - I have a Saeco 12 - marked on the sprue plate and no where else. It is a 38/357 Keith type semi wadcutter. Casts about 0.359" and 154 grains. Similar to the RCBS 150 KT.

[badbob454]

saeco 381 2 cavity 38 button nose wadcutter 156 gr.

[bobthenailer]

#380 95gr rn for the 380 , i have a 4 cavity