358- 180grn RN Mold

[Huck Berry]

I am looking for a 357/358cal 180grn Round Nose mold.
I have found some truncated cone flat point but can't find a RN.
Thanks, Huck

[357maximum]

Bruce at BRP makes a 180 grain version of the 358430 and would be more than happy to make you one. I have one and it is seriously accurate in my 357max and my 35 remmy, did pretty good in the 38special rook rifle also. Mine is gaschecked but I think he will do it either way. He is not available here on weekends....so heads up that he will not respond till monday if you Pm him.


He is available down in the vendor sponsor area or his page on castpics:

http://www.brp.castpics.net/

[GLL]

I had Bruce at BRP design me a couple custom moulds that are variations of the 358430. The bullet on the right is 160 grains. The left is 180 grains available with or without gas check..
They are now part of his standard catalog !

Jerry

http://www.fototime.com/17E47F2BF83493A/standard.jpg

[GLL]

357maximum beat me to the draw ! :) :)

Jerry

[94Doug]

RCBS also made a 175 grain RN...they are now a semi custom deal from them. I do know there is one for sale out there.


Doug

[GLL]

94Doug:

PM to you !

Jerry

[BCall]

The RCBS is a nice mold, mine drops at 187 grains lubed and checked from WW. But it is a gas check mold, which I think is not really needed. But they shoot good, especially from my Handi rifle.
http://i258.photobucket.com/albums/hh259/blcall/SN851395.jpg

[Beerd]

Huck,
welcome to castboolits!
looks like you are getting some answers here
..

[Huck Berry]

Thank you very much, I am looking for a non gas check bullet and will check there molds out. Also thanks for the pictures.
Huck