PDA

View Full Version : Anyone have a 20ga 2 3/4in. trap load?



Arisaka99
01-13-2011, 03:49 PM
I am looking for some load data for a high brass 20ga 2 3/4 shell with either remington power piston wads, or waa20 wads. Preferably 7/8oz. or 1 oz. thanks guys.

camerl2009
01-13-2011, 04:39 PM
what hulls do you have

oneokie
01-13-2011, 06:43 PM
Check on the Alliant website. Request one of their free load manuals. Send an email to their ballistician with what you are wanting to use the load for, and what components you have/will be using. Or call them. They are very helpful.

Arisaka99
01-13-2011, 07:45 PM
I've got remington high brass, and low brass.

camerl2009
01-13-2011, 10:27 PM
I've got remington high brass, and low brass.

that tells me nothing i need to know what type

Arisaka99
01-13-2011, 10:29 PM
Well some of them are gun club and some of them are express long range shells.

camerl2009
01-14-2011, 12:12 AM
Well some of them are gun club and some of them are express long range shells.

look at the base wad if thare the same you can use the same data
for both

i will see what i have for gun club

camerl2009
01-14-2011, 12:24 AM
Shotshell
20 Gauge
•2 3/4-in. Remington Plastic Shells (STS)
•1 shot wt.
•Rem 209P
•WAA 20F1

Shot Wt.(ounces) Velocity (fps) Primer Powder Wad Grains Approx. psi
1, 1,200 , Rem 209P, Blue Dot WAA 20F1 23.5 10,900


follow all data listed gun club hulls are sts

Arisaka99
01-14-2011, 07:14 AM
What is the base wad? and what are the express long range ones?

Arisaka99
01-14-2011, 07:16 AM
and the wads that I have are the orange duster ones, they just say waa 20 on them and they are 7/8 oz. the power piston wads are 1oz.

camerl2009
01-14-2011, 12:02 PM
What is the base wad? and what are the express long range ones?

:shock: its the wad at the bottom of the hull

if it looks the same as the gun club then you can use them with the same data

camerl2009
01-14-2011, 12:03 PM
get lymans #5 shotshell book it will help alot

it has a hull ID in it

camerl2009
01-14-2011, 12:12 PM
and the wads that I have are the orange duster ones, they just say waa 20 on them and they are 7/8 oz. the power piston wads are 1oz.

you buy

wads,primers,and powders for the shell and data you have

you cant play with it PSI can go though the roof in shotshell its not good