winch 94 extractor

[primersp]

hello
sometime an spent case is not extract entirely of the chamber ,it come out about 1 inch and i must grab it with fingher .
must change the extractor or i can ajust by bending ,the hook is good
thanks

[MtGun44]

Look at the surface of the hook. Does it seem to be worn? If worn slightly, possibly
you can stone the hook back to a 90 degree angle so it will not slip off of the rim.

Bill

[looseprojectile]

Some of the old Winchesters I have shot have had weak and worn extractors.
It has become a habit to hold down on the extractor with the left thumb on those.
If that don't do it it is fairly easy to replace it or resharpen the hook.
I have annealed and bent and re hardened and drawn the temper on them. Only takes about twenty minutes. The 92s are the worst offender.
A lot of times they just need a good cleaning. Crud gets underneath.
Good luck.

Life is good

[primersp]

thanks fellows