30/30 soupcan tite group

[lastborn]

Anybody using Hodgdon Tite Group with there 30/30 lee soupcan boolit.I have The Lyman 47th--49th -- cast boolit handbook---Rcbs xast book and Lee modern reloading manuals and there is nothing in there. I have on hand H110,Unique,and Hodgdon Tite Group. I seen the loads listed/talked about in the sticky at the top. I would like to use up the Tite group.
Thanks

[lastborn]

Anybody ?

[lastborn]

How bout H110?

[excess650]

According to the burn rate chart, tite group is a really fast burning powder. http://www.hodgdon.com/burn-rate.html

Depending upon how fast you want to go, start at 3gr and work up 1/2 gr at a time looking for accuracy and pressure. I've used Solo 1000 with a similar weight plainbase bullet and found 3gr to shoot pretty close to POA with my sights set for 17gr AA5744 with a 175gr GC.

I wouldn't even consider H110 in the 30-30. Load density is too low for the caliber and burn rate, and you're inviting SEE.

[RU shooter]

Havent used Tite group but Unique will work just fine try 10 grs.

[NHlever]

According to Quick Load you can use between 5.0 and 10.0 grains of TiteGroup in the 30-30 behind the Lee 113 FN for around 1100-1600 Fps. at safe pressures.