Lubricator/sizer die id.

[Lively Boy]

well my question is how to id. two sizer dies that were given to me. the body has 4 sets of 4 holes, the body is stepped,.722 or so and .702 or so. they have a groove at the top of the body, wich is rounded and about .025 deep one is marked 280 and the other is 358 the top punches are 311 and 412 . the pin for the 280 looks like it was made for a bevel based bullet the other is flat. i would take pics but all i have is cell phone camera so quality might be rough. I have no use for them so just want to id. them so i can find someone that wants them. I pan lube so have no use for them. thanks for the help!

[HATCH]

http://i.ebayimg.com/05/!C!W8tZ!CGk~$(KGrHqZ,!lYEz+2+5gwYBNCnLFgQLQ~~_12.J PG

that is a lyman/rcbs style die


the numbers are the size
You have a .280 and a .358 size die

[MtGun44]

The .358 diam with the 311 top punch is for the 158gr RN .38 Spl old school standard boolit,
the 358311 (top punch is usually named after the first design that used it). The .280 diam is
for .270 Win (.277 groove diam) rifle boolits.

I'll give ya $5 for the .358 if you are just trying to get rid of it.

Bill

[Lively Boy]

here is a couple of pics if i did the attachment thing correct and 5 buck is fine by me if the die is correct