correct handles?

[Olevern]

Just bought a 4C Saeco mold (#955)
Priced Saeco handles (ouch)
Anybody know if Lee 6 cav. or RCBS or Lyman handles would fit?

[oso]

IIRC, Lee handles oughta work if the mounting holes are drilled out to 3/16"
RCBS handles are not as thick and the mounting holes are even smaller and closer to the edge than Lee's.
Lyman 4 cav handles are even thinner than the RCBS.

[Olevern]

Thanks,
Guess I will just bite the bullet and order Saeco handles from Midway. Just frosts me that a new mold will be in my hands in a day or two and I will not be able to put it to use for a week or two.
vern

[casterofboolits]

I would advise that you purchase the Saeco handles. I have four sets and sixteen Saeco moulds. Correct handles makes casting much more enjoyable. Midway has decent prices on the Saeco mould handles.

[BCall]

This is my set of Saeco handles. Couldn't bring myself to pay for the actual Saeco ones, so I just drilled the screw hole in a set of Lee handles out a little bit so the Saeco mounting screw would fit and they work just fine. marked them with an S on the end so I know they are for Saeco molds and I don't get them mixed up with the other Lee handles I have. Didn't have to do anything else to them and they work perfectly fine.
http://i258.photobucket.com/albums/hh259/blcall/SN851214.jpg