HELP!! How to use NOE HP/FP mold

[GARCIA]

First time ever using one of the excellant NOE HP/FP molds and I am lost!

How do I set up the adjusting/sliding bar on the bottom of the mold so that I can cast HP's?

Any guidance by the board members will be of great help!

Tom

[PacMan]

After installing the HP pins sust slide the bars/pin holders up against the side of the mold and tighten.No real adjustment required.

[Blammer]

Take out the screw that the tool is pointing too. Take it completely out.
Take the retaining pin OFF of the bracket.
The bracket holding the pin will come loose with it.

Once the retaining pin is out of the bracket, you'll see how you can slide out the pin.

Once the bracket is out, slide out the pin you don't want, slide in the pin you do want.

assemble in reverse order. :)


http://castboolits.gunloads.com/picture.php?albumid=31&pictureid=3063

[GARCIA]

Thanks for the responses!
Got it figured out with all your help.

Tom

[Shooter6br]

I have a 32 .314 Hp Noe mold. When you think the mold is hot enough for HP casting HEAT IT MORE. I get perfect HP 100 grains run very hot.