- 7-08: Twisted Tail Vs. Folded
- Alloy question
- Some basic questions from a newbe
- what do you think of this bullet.
- Asking opinions on .224 P.P.
- .45-70 smooth sided mold
- Lever Actions
- 8x56R
- Speed of PP bullet?
- .303's old worn rifling not cutting the paper patch
- 300 whisper
- Where can i get a mold for paper patching a 30-06?
- Who makes a mold for paper patching a 30-06?
- Pedersoli Sharps 45/70 Which Lee Mould?
- Quick Start Paper Patching Tutorial?
- .350 Rem paper patch success
- PP lube
- 30 molds in an 8mm
- Paper patching CJ bullet from .358 to .366
- Breech seating
- Case filler/over powder filler
- Rooster Jacket: How do you apply this stuff?
- Paper patching question
- Paper Patching the RCBS 165 Silhouette Boolit in .308 Winchester
- Question regarding patching for a 91-30
- Lyman foster slugs
- Hunting with PP bullets
- P.P. .25 Ackley Krag?
- PP .32 Special
- Why 2 Wraps?
- What is your method of lubing for Smokeless PP?
- Accuracy problems
- 303brit & IMR4064
- Noe 303-212 pp
- What is happening with my brass?
- Any Casters Handy Dandy Toy.
- 38-55
- Due Diligence And The Smokeless Paper Patch
- Area's/ Items of discovery to be aware of in the technique of Paper Patching.
- The 30-223AI
- 25-35
- PP'ing for Encore
- Can one Paper Patch for the .220 Swift Cartridge?
- What caliber for smokeless patching
- Might be of interest...
- Paper Patching 30-30
- Favourite 6.5x55 setup
- Noob- PP vs Grease Groove vs J word?
- Swaged PP .30cal bullets?
- Lee 170gr FN PP for Mosin
- NEI Walt cut dual cavity paper patch mold value?
- Sizing patched bullets
- NOE's PUSH-THRU DIE
- question about smokeless powder
- Paper Question
- .270 win
- First Test Patches
- Do we have a paper patch picture thread?
- unpatched bullet size for .3015" bore ?
- Vellum Score
- Patching well into ogive area.
- What Should I Expect?
- Something well worth the time to read.
- My Paper Patching Plan thus far
- Abrasives & PP Lapping
- Anyone using Trail Boss powder in their .43 Spanish?
- Paper patched bullet for 22 Savage Hi-Power
- PP Questions, Saeco #315 & .308 Winchester
- Questions about dry patching / sizing
- 20 lb greenbar ?
- Does the patch come off?
- the perfect hunting bullet..... graphic
- Smokless loads for 8mm kropateschek
- Cartridges feeding from magazine
- Hunting accuracy from fast twist (1-10) barrel at full jacketed velocity?
- Need some 16lb green bar printer paper
- It was begging for it, so..............
- Researching a paper patch polishing system?
- Lyman 439186 370 gr to 458-460 ?
- .300 Savage experience
- Paper Patching with oven Paper
- I paper patched .22 pellet gun pellet for 25ACP
- How large can a patched bullet be?
- PP failure with Lee 450-200 gr RN in the 45/70
- Waxed Paper
- PP and Micro Groove
- Use of Lyman 311466 for pping
- Paper that DOESN'T work
- 301620 (210gr) Mold and 30-30
- newbie needs advice (with picture)
- Will this work?
- sizing down a .30 cal.... how is it done?
- Goodness!
- Help with powder usage
- my thinking about "soft casts".
- The Angle Leading Into The Rifling
- Paper patching and Forensic Ballistics
- Revolvers and Paper Patching
- Dot Matrix Paper?
- PPB in gas guns?
- Old pro's and new guys , a cautionary tale of reloading.
- 300wm good luck on first try
- 45 acp bullet in 45-70
- Correlations of powder burn and alloy in PP
- scritta paper
- My first paper patched bullets.
- Sizing
- Papers
- Getting serious
- Has any body tried PP .270 j-words to 7mm
- Paper patching just the nose?
- cigarette roller ???
- Boolits stuck in rifling when unchambered okay?
- Barrel twist question
- paper patch in rifle with muzzle brake?
- How much tolerance in boolit core for paper patching?
- 300 Win Mag Load with PP Lee 90307
- 9.3 x 74 ?? PP?
- Ongoing 300wm testing, first 1moa group
- Paper Patched 308
- Real world accuracy
- Any issues for PP'ing a slower boolit?
- Paper patch vs GG cast in 30-06
- Paper Patching .308 to 8mm
- Starting Down This Road with ?'s
- Paper damaging while chambering
- Strathmore 300 Tracing Paper.
- Paper Patched Alloy Bullets for the 6.5 Creedmoor ... ?
- shooting long range at deer and elk with paper patched boolits with 30-06
- Question on lapping 378674 mould for PPing in .375 H & H
- Breachseating pp bullets ahead of case.
- Flyer vs. Poof in Flight?
- 7.62x39 PP Boolit size
- Paper Patching for the Double Rifle
- Paper patch to polish a rough bore?
- shooting pp in my .45
- 450 400 Nitro Express paper patch mold choice
- Cigarette Papers
- 40-65
- Paper Patching 308 for the 303 Brit
- Modified 31141 for PP ?
- Happy-thanks to everyone
- Metford rifling and the patch ????
- Powder Coated Bullets
- Paper patch load development
- 303 pp mold recommendations
- (mostly) smokeless paper patching
- Sizing die dims for PP boolits
- OK this is going to sound a little weird, PP steel .50 BMG bullet
- 6.5x53R Mannlicher
- Patch just the drive bands of bore rider?
- 375 Rimless Nitro Express 2 1/4 Paper Patched
- paper patch 375 H&H
- Paper Jacket
- Mold for pp?
- What happens if you paper patch over size" ...and how much is too much?
- Paper patching for .223
- So let me get this right about Paper Patching
- paper patching 45-70 bullets.
- paper patched 9.3X72R
- Patching a 9mm to 380
- Paper Patch Mold?
- Paper patching to improve a bore
- New to paper patching
- Paper patching the .303 British
- What paper for patching?
- Huh?
- Teflon tape ?
- 280 Ross Paper Patching?
- Total noob question...
- paper patch glue idea
- Sorts of out of bounds, but canīt think of a better place..
- Anyone Paper Patch for a 44 Special/44 Magnum rifle ?
- Measuring bore diameter
- 375 h&h
- Buffalo Arms 9lb Onion Skin Too Thin