- Speaking of throats........
- 100% Cotton?
- question about paper patch for win 94 30-30
- a paper patch
- cerrosafe casting problem
- PPing commercial cast boolits
- What style and shape of cast bullet is best for the paper patch?
- Lead Wheel Weights, the correct alloy for patching?
- Excel has an ap for making templets
- Finally found a technique that works
- 7mm-08 again
- Anyone patching for a 223 or 22-250?
- Any thoughts on tape?
- How 'bout the 243?
- Looking for paper...
- The use of lube when PPing - Questions
- first paper patch attempt
- BC powder paper ?
- Opinions if it will work....
- Boolit rotational speeds?
- 8x56R using Paper Patched LEE KAR 239 GR sized to 0.325
- PP for the the .338 Winchester ?
- Tested some PP hollowpoints yesterday
- Another Odd One The 8MM Kropatschek
- paper patching and lever rifles
- 3 rifles 6 loads and my thanks
- Sizing die needed .....
- Please take this survey!
- First PPB and questions about Arisaka and VZ24
- Lubrisizer for paperpatch bullet?
- How much powder for a full case with 405 grain boolit?
- HELP Paper Patching Sharps Rifles!
- PP moulds up and running
- Please recommend .454 Casull PP carbine bullet.
- NEF Overbore 44 mag Handi Rifle
- Recommended Powders.
- Paper Patching!
- How do I need to put the paper up?
- Tumbling
- My first PP bullets
- Another Questiion for Paper patching Gewehr 88
- lube drying out on paperpatch?
- has any one paperpatched any 375 cal.
- Eureka!
- Paper Patching of raw 311291's & how to do properly.
- Some newb questions on paper patching
- A question on sizing, or not...
- Lee 309 - 230 - 5R
- OK, I have to give this paperpatch thing a try and I have questions.
- paper patching for a smokeless ML
- 45 cal. Paper patch boolit ?
- PP for the 30-40 Kaig
- interesting 308 win + RL-7 + paperpatch
- First outing with the #301618 NOE boolits
- Patching the 7.7 Arisaka
- Alcan powders
- Who would like to read Paul Matthew's book The Paper Jacket?
- throat
- rifling leed
- PP'ing 8mm boolits for use in a 338WM.
- Shopping for supplies.........................
- Why not self-adhesive paper tape?
- Gas check and paper patch?
- Dabbling, gots questions.
- Paper Patching in Rough Barrels
- 7X57 project
- powder for patching
- PP boolits and pressure
- My First PPCB's Go Downrange...
- NEW TO PP's
- Bore polish
- Boolet size
- Savage rifles.
- Paperpatching accuracy while passing a Gas port.
- Paper patching for rough barrels: input appreciated
- PP in the .445SM Handi
- Papper question
- Powder choice for PP 7.62x54r first try
- PP and Crimping
- A GOOD paper patch lube that is waterproof??
- Bullet Size...
- how fast can I go ?
- Patching a .35Rem Remington Model 81 Autoloader
- Having problems with 45-70 brass.
- 357 PPCB for Rossi 92
- An interesting result
- Mosin issues.
- Some success w/338 RCM
- Foam insulation as filler?
- Full length resizing - or not, with .45-70 tube magazine?
- 270 winchester
- Paul Matthews: 5744 for 45-70 PP?
- NEO 301-212 it's a start
- Slugged my Browning 1886: .456. Does that sound right?
- Does anybody make 30 cal paper patch moulds?
- Guide gun question
- Is anyone PP the 32 wincheter special for a single shot rifle?
- Unique for a PP IN THE 32 WIN SPEC.
- guide gun loads
- Storing loaded patched ammunition
- 3D Printed Bullet-Jackets
- Need a little help with 45-70 pp
- 45/70 - thanks guys
- .38-55 taper crimp die?
- Paper patching commercial cast 30cal bullets for 30-06 in a 03A3
- Paper patching for a 357 mag
- The possessed rifle
- Angle of cutting paper patches
- Please Help.....Failing miseraably.....!
- Where`s pdawg?
- 280 ai .....
- Can a lubed patch ever burnish/wear a bore?
- patching the 32-20 ?
- Reactive filler
- 375 Holland & Holland Paper Patch
- Need some experience on 303 Loads
- 338 win. Mag
- 357 pp
- First Paper Patch Boolit from my 1940 ShtLE
- PP'd bullets and obstructions
- Boat tail PP boolits
- does any body else inlarge the primer flash hole on 45/70 brass as i do?
- Molds for PPCB cores?
- 8x57 Paper Patching Questions
- NEW 8mm Mauser PP mold from Accurate
- Paper Patching for a good bore 303 Brit
- PP a Mosin Nagant?
- pp a .358 in a 375 win.
- Paper Patching
- How Heavy a .45-70 for a Shoulder Pass Through?
- bulletsize
- Want to PP my 9.3
- H&R Buffalo Classic 45/70....
- How fast is practical
- First PP Load Tests
- Getting started with a 308 Win PPCB
- fal and patching?
- Lube on paper & sizing after patch
- Soggy patch fix
- PP for a 43 Spanish RB Load needed
- Patching the lee 8x56 R boolit to .338
- Paper Patch Article
- Problem reducing diameter of NOE 358009 to allow paper patching for .35 Whelen
- Bonding the Paper Patch Wraps Together
- Original Trapdoor and PP
- New to PP. Paper patching hunting bullets for 7.62x54R and case neck sizing
- New to PP. Paper patching hunting bullets for 7.62x54R and case neck sizing
- Paper Cuttters?
- A few newbie questions: light bullets, case filler, sizing
- Patching bore riders vs non bore riders and wrapping the base
- While lithuim grease for PP bullet lube?
- Patching 291's almost.
- Ben's tumble lube as a paper patch lube.
- patch lube
- How to apply patch lube
- paper patching .690 round ball for 12 ga shotgun??
- A new rifle. ......
- New 45 cal. PP rifle boolit at NOE
- Bright idea?
- My old Martini .303
- Preffered brass length for patch purposes?
- Trying something new... 321232 in 308 Winchester
- Noe 301 200
- Advantage of chamfer on plain based boolits used for PP ?
- New Patched Boolit for my 1902 LE I
- A gifted mould perfect for a 45.
- Sucessful hunting with a patched boolit.
- Converting LEE mold to Paper Patch mold ????
- NOE 301 170 works pretty good in the 30-30
- Paper composition
- First Paper Patched Cartridge
- Paper Patching 308 j-words for the 303 Brit
- In need of paper patched 38-55 for Model 94
- 308 issue
- Lee 8mm Karabiner mould
- bullet seating
- Powder options
- Lee KAR mold up to 0.330 for 8x56R Hungarian
- 45-70 paper patch issue
- Source for patched bullets
- 30-06 and 2400 powder
- Cowboy loads paper patched?
- Questions.
- 357 max and PP
- question on Ideal 280468
- Sizer dies
- relatively quick sizing die bushings
- 8x52R Siamese Mauser Paper Patch
- 32 Special: Iis it a candidate?
- Does anyone have targets from good paper patched loads to show?
- Stupidity looks good!
- first and second try
- thoughts on lube
- Paper patching the 30/30
- 480 Ruger/475 Linbaugh PP for rifle?....
- 30-30 paper patch newbie
- Grab your hats! Some Notions About Rifle Bullets (American Rifleman, March 1906)
- patching a Browning 71
- 577/450 Martini Henry
- Paper Patch Throat?
- PP 44 Mag
- PP 12 gauge slugs
- 9.3x72R
- 458 WM load for PP
- Paper Patch .338-06
- Questions about an Argentine .43 Spanish RRB
- A paper jacket that stays on
- INFO on paoer types
- PP .452 to .459?
- Paper patching vs powder or Hi-TEK coating
- .40 to .41?
- white tail with pp bullet
- 220 gr. PP for 30-30
- funny story
- paper patched bullet
- First ever paper patched boolit!
- advice on trapdoor patching
- BHN increase or not after my swagging 008.
- Any Advice?
- Ruger #1 416 Remington Mag
- Hope this is the right forum.....38-55 Paper patching a Jacketed bullet?
- Green bar tractor feed paper w/o the green-
- Experience with Paper Patched .357 Magnum in a carbine?
- 360 DW carbine
- what causes a bullet to strip it's patch and LEAD the bore??
- patching material other than paper
- Anyone Have Success PaperPatching 44 Magnum Rifle?
- Anyone patching the 375 h&h
- .405 wcf
- Loading 8mm Mauser for Gewehr 88/05/35
- Where do you find green bar paper?
- PP with 400 or 600 grit paper?
- PP for a Rossi R92, 44 mag lever gun
- What size sizing die to run the patched bullet thru
- my son discovered my 2, 45/70/s
- superior .30 cal grease groove boolit for paper patching?
- Strange question
- Critique please - first pp
- PP a m95 8x56r?
- Have Any Of You Guys Tried This
- New 338-06 PP rifle
- .359 sizing die and cookie cutters
- PP Newbie, will an 8mm Boolit PP up to work in my 338WM?
- Trail Boss paper patch 45-70
- My .22 Hornet PP succeeds, my .303 British PP not yet ...
- .22 mould design conducive to paper patching?
- Case lube for P.P.?
- Fail: patching 452 255 SWC to 458 for 45-70
- 300 win mag
- Paper Patching for my 1896 Lee Enfield