- PC Hm2 .223- quick range trip
- Experts what do you think?
- 7mm bullet suggestions?
- Powder coating gas checked boolits
- Has anyone turned back to standar lube after successfully PD'ing
- Humidity Proof DT
- Finally 3rd oven works good
- Brotherhood of the Colored Boolit
- Powder Coat and expanding ?
- intrusting find at work
- Easy high volume PC baking.
- PID built for powder coating oven.
- Have you tried a PC that doesn't work?
- Water quenching PC bullets from the oven?
- Hardness question
- Happy 4th of July!
- hi-tek coating in 7.62x39
- What alloys are you using with Powder coated bullets
- Best powder gun?
- LLA and paste wax
- ESPC and flash on the base of the bullets
- Hi-Tek test this weekend
- New set-up
- new pc oven rack
- "poly case ammo"
- PIS + SSR box or case
- 45acp PC round ball
- Powder coating basic equipment needed
- Powder coating basic equipment
- MP 359-640 penta point in Hi-Tek Red Copper
- Soft lead?
- PC cure time
- How much powder???
- PC Questions
- 1:7 twist 300blk
- Wife wanted green so she's getting green!
- Okay ....who bought all pc spayers at harbour freight .?
- Powder Coating Oven Inside?
- Gas check over PC does anything???
- 1st At PC, need some help
- Powder Coat musings
- Plastic inserts for bullet tips
- Tried Tumble PC for the first time
- Ar 15 coated bullet
- harbour freight pc sprayer extra parts ?
- New to me with PC
- Hi-Tek test again with questions
- Isn't red and white supposed to be pink?
- PC and the Nagant Revolver
- PC cast in the 6.8
- Hi-tek coated bullets are tumbling
- Hi-Tek boolits vs uncoated lead
- PC bullets in old guns
- Done with harbor freight black
- new colors - for me
- Standing up rifle boolits for baking? (esp shake and bake)
- Beagle333's tray method for ESPC
- Smoke sells PC ?
- loose gas checks with powder coat
- Florescent orange
- So I'm considering to try powder coating
- Anyone PCing for 30 Carbine?
- Range tested HR red PC Boolits.
- I'm worn out !
- If it works, mess with it
- the great PC vs 45/45/10 shoot out!!
- Powder Coat Beveled Base Boolit
- Coated rifle boolit target/accuracy result log
- Doh! Snuck up on again
- Still copper plating.
- Big Sarge
- Water quenching for hardness with PC/an observation
- TL, Grease Groove or No Groove in pistol boolits?
- Harbor Freight PC ?
- 458 socom big boolits?
- Sizing leaving an exposed sliver...ok to shoot? With pic
- Powder degrading PC?
- Powder Coating and pitted bore?
- Noobee HF Red Questions
- Negative Ion generator?
- Remelting powder coated range scrap
- Gas Check with PC
- Clean Glock
- What is Ure Poly?
- PC'd boolit weight variation
- Mold recommendations for a PCed boolit for 450 Marlin?
- Safely removing 45-45-10
- PC'd bullets easier to load?
- Test of: PC reacting with Gun Powder
- Who powder coats to achieve high velocity?
- Powder coat Question
- Another World record with Hi-Tek coating
- New , and another Record for Hi-Tek Coated boolits
- You guys are killing me ! New PC' er
- nOOb question
- How do you do multiple coats?
- Wisdom for my fellow newbys
- A few " Shake & Bake "
- Reverse thinking on powder coating
- So you want to bake .223 boolets ?
- Bad coating...good shooting!
- 20% Sale at Prismatic Powders
- Noob would like to try PCing
- Powder coating cast bullets process
- Wasn't quite what I had in mind...
- First time powder coating, whee!
- Powder Coating and gas checks...
- HF WHITE Powder being a clear?
- P-FORCE AIRSOFT BBs ?
- packing peanuts in place of asbb
- You know you might have a problem when....
- Any PC or lead build up in pistol comps?
- PC before GC?
- PC swaged half jacket boolits?
- New PC'ers...
- love pc haaate picking them out
- Joined the crowd
- Anyone using Eastwood Hot Coat Copper Metallic? Not bonding to lead...
- Is anyone still using Klass Kote?
- Lead fouling vs Powder Fouling PC Boolits
- Chronograph question
- First time powder coating
- Smoke's PC ordering info
- "Drying" Alox
- Aluminum gas check wows continues.
- Liquid X-Lox
- smokes powders rock
- HF PC gun questions
- Another HF powder coat gun question
- First successful? powder coat job
- Need some advice on 2 problems
- Cleaning boolits before coating?
- Does the PC negate the need for a GC...?
- 22 Bator
- Powder Coating Bullet performance
- Tried 2 new to me things tonight.
- Degreasing boolits
- first time powder coat = major leading in last inch of barrel
- Frosted or Smooth best for PC with ASBB
- Powder coating and flyers
- couple of cooking pc questions
- Newbie pc question
- First time ASBB powdercoat Half good
- Powder Coating for Pistol Caliber AR Carbine
- Hi-Tek test loads.
- Full 100% coating on driving bands important?
- Right direction?
- Temperature Differences
- Strange COL issues
- Heavier coat for store bought boolits
- Hi-Tek vs. Powdercoating
- Adjusting size with PC
- See where my hobbies end up leading me!!
- mixing HF colors for ASBBDT?
- Pizza screen users, a question.
- Using Lee Factory Cripm Die To Size Tumble Lube Groove Bullets
- PC leading in 9mm
- question for the experts
- First moly bullets
- Finish issues with ASBBDT
- Turn a Lyman lube sizer into push through...
- 9mm PC - One size to fit all barrels? Part 1 success
- First go at PC boolits
- Pistol Powder Attacking Powder Coated Bullets?
- Prismatic Powder 15% off
- Potential issue with my PC
- 45-45-10 for rifle
- .0002 added to my boolits
- Questions about getting started in Powder coating
- 60gr NOE .225 tested.............
- **** now what
- Brotherhood of the Colored Boolit.........Don't forget it!!!!!!
- For those who tumble powder coating...
- do any of you guys have any tricks to powder coating down to the base ?
- Belt-fed copper plated cast projectile video
- Has anyone done a time comparison of spray vs tumbling?
- Best Hemostats?
- Rifle bullets powder coating experience
- thinking about powder coating
- PC Loverin style bullet
- Wads with PC ?
- Thought I would share some hunting rifle results
- Great results at the range.
- New guy introduction
- Is flat black H.F. powder coating bad for bore
- ASBBDT first results.
- Christmas Time .....
- Can already lubed boolits be powder coated?
- How do you bake long bullets?
- New guy from Texas
- Loading Powder coated boolits
- Glock
- new powdercoater with a few questions
- Ordered some magic dust
- Anyone rigged up a bullet feeder to their press for use with a push through sizer?
- I need help powder coating...
- Silicone is your friend
- PC boolits with no lube grooves?
- bubbly coat
- Smoke's Clear
- A new twist on tweezers, hemostats, needle-nose pliers...
- Powder coating Commercial cast boolit w/o resizing???
- #5 container for small boolits
- Bangerjim
- problem with pc bullets
- Teflon Tape as a wrap to increase boolit diamiter.
- Prismatic Powder has 15% off today
- Might really be a Stupid Question
- bullet feeders with PC Boolits?
- What Powder Coat Paint for .45-70?
- Powder coating a handrail?
- Gas checking and powder coating
- PC'ing .224" Pills
- New mold from Tom at Accurate Molds
- Loading poly coated bullets.
- Can a tight group lead?
- Anyone tried Prismatic "Psycho Lime"?
- Prismatic Powder 15% Off with Promo Code Pris15
- Hi Tek in the carcano / gain rifling
- PC results in 2 rifles.
- Two piece boolit and PC
- Penn Bullets coating???
- Makin' new trays today...
- New tray loader
- Size question for PC'd Rifle bullets
- PC problem...
- Went & Done IT
- PC'ing other things
- Powder coating getting darker.
- What am I missing out on? Not sure I get the PC thing??
- Is anybody here casting hollow point boolits so you can do this?
- Shake and Bake Diameter Increaser
- First time poly coating
- NOE Bullet Base Chamfer Tool modified for Case Prep Station
- Velocity limitations?
- Powder Coating fouling?
- espc with gun indoors
- eezox vs PC
- Just for kicks sized from 516 down to 501 Results Pics
- First time using a spray gun
- Powder Coating Troubleshooting Tips
- This might help someone
- Any way or removing cured powder coat and saving bullets?
- What HF RED should look like!
- Installing Gas Checks over powder coat
- An Observation
- Another reason to tumble powder coat and cook base down.
- How to keep your veins open! AKA A word on running too thin...
- Right amount of powder.
- Pistol Powder Attacking Powder Coating? (58 day test results)