- Started Sat.
- Powder coated boolits and boolit feeder on progressive press
- First Attempt at DT PC (and my first post!) - Are these good enough?
- Lead shot question.
- Pre powder coat sizing
- Lead in Barrell
- Hi-Tek coating
- Water Quenching after PC?
- Consensus Opinion - Size before PC and After or Just After
- Powder By The Pound
- Well, I thought it was a stroke of genius
- Size to .309 or .311 for PC 300 blk
- Powder coat fire lapping
- Sizing - consensus
- ESPC First run - some observations
- Forget balancing boolits on nuts
- Removing powder coating.?
- HAH!! Now Forget Non Stick Tin Foil!
- Found a great use for my useless Lyman Turbo Tumbler.
- Increased size due to color type
- The non color role of pigment in PC coating selections.
- 45/70 care package consultation needed
- Revisiting and old friend
- Problems with 30-06
- Information overload
- Ah Hah!
- Decided to torture test some 9mm ESPC boolits
- Did my first batchs to day.
- 300 Blackout cast & poeder coat - trial notes
- Have you noticed that PC protects your boolits?
- PC'd boolits in Micro Groove
- Air compressor question
- Tumble coating bullet question
- sizing info needed
- Problem with powder coating????
- is shelf life good on pc
- New NOE molds
- I am looking for definative accuracy testing of PC lead in rifles
- Cast rifle bullets and PC what about... ?
- want to order pc bullets
- 9mm PC Accuracy
- What PC velocities are you up to?
- Lube Groove Choices
- PC Experiment in TOUGHNESS
- Lee Push through dies
- Would like to find 40-45 gr .22 cal PC boolits
- Help
- Potential for pitted barrels?
- How long do I wait to Powder coat after I cast boolits?
- Hi-Tek Powder Coating
- Powder Coat Shenanigans
- Non-stick parchment paper
- question on coating procedure
- When to Size
- 2K epoxy paint + thinner. Unbaked.
- Does Size Matter?
- How Fast is your Bullet?
- PC the New 300 AAC Blackout Lee Mold
- Dazed and Confused
- Dazed and Confused
- What do you lube PC'ed bullets with before sizing
- PC'd boolits in a suppressor/
- First Powder Coat after first Casting
- Head Scratcher
- Removing Alox before PC?
- Powder coated for the first time today
- pc'd obturating out lube groove
- Toaster ovens and their accuracy
- Coating coverage-recoat, or good enough?
- first try at shake and bake ...
- pc or epoxy coated rifle loads: what speeds and accuracy are you getting?
- M1 garand PC 174gr boolits
- I might be half-baked, but I'm taking the plunge.
- Sharp throat/chamber step
- No more moving coated boolits!
- First attempt at coatings, mixed results
- Auuuugh!!!
- Off to the Races
- PC issues w/ rifle
- Tried a new way, for me anyway
- TL - or lube groove - design, which one is better for coating?
- best way to coat large numbers of boolits?
- POWDERCOATING!! to gas check or not to gas check. thats the question.
- Spraying powder coat onto bullets with spray gun
- Doubts about powder coating :-)
- Can PC boolits be re-smelted?
- some of my recent coated boolits
- Low Cure PC Paint Question
- Non TGIC paint usage vs TGIC paints?
- Going back to tumble allox and traditional lube. An awakening.
- powder contamination?
- Who sells Powder coated Boolits?
- How I spray tall rifle boolits.....
- Powder coated cast
- What kind of coating is on this .455 mkII
- PC first try not so good
- Review of the Craftsman (or Ebay) spray gun??
- my cf rifle and pc observations
- No lube grooved bullet
- ESPC vs. Airsoft BB shake and bake method
- .38 Special DEWC Coated Bullets?
- PC what gun do you use/recommend?
- My powder coating adventure
- Does anyone use Viking Tactics RAND CLP for lubrication?
- Sizing for 300 BLK?
- Pure lead and PC
- PC'ing small caliber boolits?
- powder coating and velocity questions
- First tests with powder coating (spraying). PROBLEMS. Help! :-)
- Fascinating.Aussies chime in/ who has these colours
- Pistol Bullets in volume
- first PC boolits.
- Glow-Bugs
- moisture separator for powdercoating gun
- Maybe no gc needed with pc?
- Coatings and suppressors questions
- PC after loading
- PC and Black Powder
- Additional powder coating information you man not know...
- Bang for buck in convection ovens?
- Hi-Tek in progress with pics
- must bb's ever be cleaned?
- Got the big stuff ordered!
- bench rest approach to pc
- Deal Alert for those that PC .45 mold
- Extra cups for the Craftsman sprayer?
- Who has brought the Craftsman PC gun off of ebay recently (in the last month)?
- Mixing Hi-Tek powder
- Abrasivenss of PC
- thickness of aluminum plate
- electric powder coaters!....are you tired of picking foil off yer boolits?
- Powder coated today and more lessons learned
- echo ware?
- PC boolits that work or don't work
- Question for powder coaters
- water quenching hi-tek
- Will a $19 Walmart (Rival) toaster oven work for PC?
- Dust mask recomendations?
- Respirator Filter Type For Powdercoating
- Tight throats and ASBBDT (30 cal)
- An alternative methode of " Going Green"
- gas check seating after dry tumble pc
- PC HP boolits
- Good grounding for Electrostatic powdercoating
- What brand of convection is holding up the best?
- Containers that do NOT work for Dry tumbling
- PC Keeping the noses bare
- Oven thermometer accuracy
- Caswell PC gun
- Loads for Missouri Hi-Tek 140 gr bullets and .40 S&W?
- PCing Soft Lead Boolits
- non stick tray liner
- How fast can you push a powder coated bullet?
- PC vs Traditional Lube Time
- Has someone tried a pizza oven for baking?
- Ageing PC?
- Just tried some Smoke 4320 Powder
- Sizing PC Bullets Backwards in Lee Sizing Dies?
- Adding diameter with PC?
- Prehating boolits prior to dry tumbling
- Pc questions
- I am totally free from lube!!
- Does anyone PC for accuracy?
- Some New PC results to chew on
- PC bullets right after FMJ's?
- Finally! A breakthrough in my coating process
- another 9mm leading problem
- Updates from people PC'ing Desert Eagle 50ae
- I don't use Aluminum Foil in my Powder Coating
- powder coating vs hi-tech
- Hi-Tek noob data question
- Espc tumble lube grooved projectiles
- muzzleloaders and pc boolits
- Critique my PC anyone?
- Powder Coating Cases?
- WQ PC boolits?
- FWIW, a different way to PC
- Hi-tek & rifle loads
- Lyman #311299 for 30-06?
- glow in the dark additive
- New PC'er--a couple lessons learned, and some success
- PC and a RB
- PC Boolits sized to 0.225 ,What size expander ?
- my home pc gun
- Baking on silicone... problem?
- Can you powder coat a toaster oven heat treated bullet?
- This just in: elephants could be susceptible to the Zombie virus.
- Powder coating through suppressors.
- Recovered Powder Coated Samples ....
- Sizing Powder Coated Bullets the Easy Way
- remelting polymer/plastic coated bullets ?
- Old Guy wants to go PC
- New Oven Commercial Counter top Convection Oven
- Used silicon mats today.
- Shake & Bake Powwwwwwder Coating and Boolits Sticking to rack , Help
- Has Anyone Found a Velocity Limit for Shake and Bake HF Red
- teflon resin based powder coat (just getting it from the descripition)
- Sized my powder coated bullets today
- Matte Black H.F. FAILURE
- pc question
- Rice in the powder/BB mix???
- .300 Blackout PCers--opinions please
- PC vs Heat Tempering
- PC without lube or GC...
- Color variation
- "Powder coating will not stick"
- Thread moved
- built an home brew pc booth
- HF black, sprayed?
- barrel wear
- Shake Coating Does Not Work In High Humidity ,Right?
- Which type of spray gun?
- Powder coating instead of "regular" lubing?
- Anyone ever grind HF red to a finer powder?
- PC through Glock barrel?
- First try at powder coating
- I turned a $18 toaster oven into a $60 one more or less.
- Another reason to powder coat
- Eastwood Oven?
- Sizing
- PC quantity question
- First round of pc
- learned so mething today
- PC'd Lee 309-230 300 BLK Subsonic Accuracy
- cleaning paint residue
- Anyone tried short Bake time especially for first coat of two coats?
- $40 Faberware toaster oven at WM anyone modified one?
- .25-35 powdercoating success?
- Powderbuythepound Matt Black Powder?
- Dry Tumble Rifle bullets
- When to remove bullets from NSAF, parchment paper, silicon mat
- PID thermocouple type for ovens
- PC dust in eyes?
- Happiness is...
- Hi-Tek coating trouble.
- .30-30...... PC or lube?
- Both PC and lube?
- Lubricity of Powder Coat
- almost ready to PC
- cleaning bullets.
- How long in the oven?
- Gas check or not for 300BLK?
- I will NEVER,,
- Powder Coat ?
- Decided to give PC a try!
- Hey, BangerJim!
- Better than coolwhip?
- You know it's time to take a break
- ASBBDT is my go-to method or I hate flashing!
- First PC - Thanks to this forum