I recently have built a 358 Winchester rifle on the T/C Encore platform and it is solely going to be a cast boolit shooter. The mold I have chosen for this rifle is from Tom at Accurate Molds. . .the 36-240K. This is a gas checked boolit and my beginning alloy is 30:1 COWW/Pewter coming in at 235.8 grains. I am looking for an accurate yet speedy load for this bullet. Powders I have for this case (I shoot A LOT of .308 Win) is IMR4064, Varget, RL15 and then I have some faster powders I use for my "hand cannons" which is AA1680, RL7 and VV N120. These are just powders I have on hand that "may" work in the 358Win case, I am open to any other suggested powders for this weight class bullet. If you have any load data you wish to share please do, and I look forward to looking it over. Thank you.
PLEASE - lets stick to the targeted bullet weight in question. I have read an awful lot of load data for the 200 and 225 grain bullets. . .I would just like to focus on 235 gr. to 250 gr. bullets and their performance and load data. Please and thank you.