Hi all,
Was wondering if any of you know if the extractor on a small alloy 310 handle is the same as the large 310 handle? Just got a small handle with missing extractor assembly. I don't have a large handle to cross reference. Thanks for the info.
Hi all,
Was wondering if any of you know if the extractor on a small alloy 310 handle is the same as the large 310 handle? Just got a small handle with missing extractor assembly. I don't have a large handle to cross reference. Thanks for the info.
IIRC these extractors are the same, the only difference in the two handles is the area where the die is screwed in.
Scott
You can easily judge the character of others by how they treat those who they think can do nothing for them.
Thanks for the reply, where would you suggest I go for parts?
Lyman still makes the tool so you could start with calling them and do a search. I'm sure you should be able to find some parts.
Just took a quick look at mine and they appear to be the same. I also have a set of alloy handles that have a broken extractor - I got them in a batch of stuff quite a while ago and since I already had a set, I just put them away to "take care of later". Later hasn't come yet. LOL Let us know what you find out please as I'm sure you and I are not the only ones that have run across this. If Lyman isn't any help - you might check the 310 shop - I just never got around to doing any checking on it. Good luck!
Lyman was out of replacement parts a year ago when I called, give them a call maybe they have stock now.
I would also post in "Helping Hands", you might get someone there with some bit and pieces lying around.
Scott
You can easily judge the character of others by how they treat those who they think can do nothing for them.
The last time this topic came up I dug out my set of broken handles and sent the hook to whoever was having this same problem at that time. Hopefully somebody else has just such a broken set to help you out now, assuming that Lyman hasn't gotten around to restocking their parts bin.
Froggie
"It aint easy being green!"
I just sent the 310 shop an email. I'm leaving in the morning and will have no cell or internet till the 12th. I'll let you guys know what they have to say when I get back.
I don't want to minimize the effort required but it appears that it could be readily whittled out of a bit of 1/4" alum or perhaps better, brass stock --
Scott
You can easily judge the character of others by how they treat those who they think can do nothing for them.
Give Brassmagnet a shout out, he may have an old "Broken" set of handles lying about .....
Scott
You can easily judge the character of others by how they treat those who they think can do nothing for them.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |