What is the size screw and thread for a British Enfield MK I III rifle ejector?
What is the size screw and thread for a British Enfield MK I III rifle ejector?
Finally found this at this link. Maybe it will be of help to others that needed this information, like me
https://www.enfield-rifles.com/screw...topic3330.html
Liberty tree collectors should have this screw. And get two while your at it. Got one and two spares for my #4MKII and one fell on the rug in my den. Couldn't find it so used one of the spares. Couple weeks later stepped on it while wearing sox. One way of finding it. Had used powerful flashlight and magnetic grabber. Frank
Have one of the hockey puck magnets on a stick. As usual couldn't find it when I needed it. Course when I stepped on it, I knew exactly what it was. Would have shown up sooner or later. Have a couple rare earth magnets that came out of computer hard drives. Those magnets are really strong. Next time will duct tape one on a dowel if something like that happens again. Frank
The thread size is "8-35" which, is bastard. However I have made several of these from 8-36 NF Screws which are close enough to thread into the hole. Unfortunately 8-36 screws are getting rather scarce and Mc Master-Carr doesn't even list them any more.
Go to Brownell's for them.
I had to make an Extended Ejector Screw for my #4 Mk1 with the Redfield Olympic Rear sight. The mount was thicker and I had to make an Ejector .060 longer than stock. The Socket Head Screw in the mount is the Ejector. see Pic.
Randy
"It's not how well you do what you know how to do,,,It's how well you do what you DON'T know how to do!"
www.buchananprecisionmachine.com
The #1 rifle ,Lee from 1888,Lee Metford ,.Lee Enfield ,and the SMLE rifles use a special thread of Enfield form ,.1656x37tpi.......The #4 rifles are different ,using more industry standard threads..........so ,for a No1 /MkIII rifle ,the thread is .1656"x37tpi.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |