I have several hundred pounds of one-pound bars as well as about 12 pounds of tin pellets. Bars had been separated by content, from Lyman #2 to pure lead with other mixes — all of which had been labeled on original containers. When the bars were repacked into five-gallon storage containers, bars were packed randomly.
Since casting bullets by alloy or mix is not possible with my lead, what are my acceptable options? Casting by hardness? Don't worry about it because 420-grain 45-70 gas checked bullets at 1800 fps won't care, and neither will 300-grain gas checked 454 Casull at 1500 fps? . . . Or what?