Manually applied Mink Oil Boot Dressing. When lubing a small amount of brass I just stick the tip of a finger in the dressing and rub the glob on my fingers evenly (thumb and first two fingers) then, roll a case between my fingers, applying the dressing thinly and evenly. Normally, I can get 3 or 4 cases lubed with one glob. I also use Lanolin and alcohol in a spray for larger batches. Lay out cases in a single layer, spray a bit of mix on the cases, it don't take much. Let alcohol evaporate and depending on the Lanolin to alcohol ratio, I have a thin layer of lanolin lube on my brass.
Mink Oil and spray Lanolin can be wiped off easily with a rag or paper towel (enough stays on the brass to act as a corrosion preventative), and my hands are so soft and smooth afterward...