For some time now, many of you have been developing your own Dixie Tri-Ball loads indeed!
We have have had some fine discussions on wads, powder, etc. Some of you have refined your loads to match Dixie's.
However, there is one point I want to stress![I] Do not use the pure lead muzzlel loading balls in your loads![/I]
These balls will upset, swage out, and cause too much sidewall pressure! We saw one barrel that had a bubble in the full choke area from a reloader trying to use ,575" pure lead balls!
Again....any hard cast balls from .575" to the ideal .600" diameter will work with the recipe I posted. Lee makes a good mold for a .600" ball...not the best, but will do for the reloader.
Follow the exact recipe I gave you and all will be well
Regards, James