RotoMetals2Reloading EverythingRepackboxInline Fabrication
Titan ReloadingLee PrecisionMCD ProductsMidSouth Shooters Supply

Results 1 to 6 of 6

Thread: Zouave Barrel..?

  1. #1
    Boolit Buddy

    SamTexas49's Avatar
    Join Date
    Aug 2010
    Location
    E Texas
    Posts
    116

    Talking Zouave Barrel..?

    OK, I posted this sort of else where but "WAY" back ( mid 70's) I had a traditional Zouave, 58 cal, 3 L/G barrel. I found at Dixie Gun works, back then, a replacement barrel, 58Cal but with 7 L/G ! dropped right in, had traditional front sight but no rear sight or bayonet lug. I put a simple ramp style williams sight on it and also added one of the "sniper" sights that slipped over muzzle and up against front sight.

    I also had picked up a Lyman 58 cal, 350 gr, SemiWadcut mould and a "sizer" die to push the bullets through to true the skirts.

    Well it was one heck of a shooter !!

    Ok, I had a weak moment and sold it.

    Since then Ive tried to look for a similar barrel since, contacted Dixie G and told them when I thought it was I had bought the barrel. They had no information to help.

    Any ideas out there?
    " I said I never had much use for one. Never said I didn't know how to use it. " Matthew Quigley

  2. #2
    Boolit Master

    Join Date
    Nov 2007
    Location
    Mtn West
    Posts
    2,188
    Been there, done that. "Shouldn't have sold it. Note to self, Doh!".

    Not much help other than quite a few Italian reproduction Zouaves out there. Auction Arms, Gunbroker, etc?. Or you can bite the bullet and get an original with the 7 groove barrel. The good news- relatively speaking they are about the easiest Civil War era musket to find in top condition. The bad news- they aren't cheap.

    I shoot a 7 groove original. You're right, they do shoot!

  3. #3
    Boolit Buddy 59sharps's Avatar
    Join Date
    Jan 2009
    Location
    Standing on the Rock
    Posts
    302
    Barrels try S &S Firearms, Bobby Hoyte, Dan whitcer, Lodgewood Or the N-SSA BOARD. You can get phone# and links off the N-SSA Org site.

  4. #4
    Boolit Buddy

    SamTexas49's Avatar
    Join Date
    Aug 2010
    Location
    E Texas
    Posts
    116
    Hmmm ! sumpin to check out ! thanks
    " I said I never had much use for one. Never said I didn't know how to use it. " Matthew Quigley

  5. #5
    Boolit Master



    home in oz's Avatar
    Join Date
    Oct 2007
    Location
    Kansas
    Posts
    693
    Yep, I regret some sales, too.

  6. #6
    Boolit Bub
    Join Date
    Dec 2006
    Location
    Latrobe,Pa.
    Posts
    49
    Thoose barrells were made by Numrich Arms. They may still have some but they are unfinished

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check