I have a chambered .357 Mag. bull barrell blank on it's way the twist is 1" in 20". What type of bullet will work with this twist? I can cast from .74 gr. to 214 gr. for this caliber, thinking of doing a stub project.
Thanks,
Lucky Joe
I have a chambered .357 Mag. bull barrell blank on it's way the twist is 1" in 20". What type of bullet will work with this twist? I can cast from .74 gr. to 214 gr. for this caliber, thinking of doing a stub project.
Thanks,
Lucky Joe
Lucky Joe
"There's always a way."
I m surprised that nobody responded to you, so I'm going to revive this old thread. I have a BSA Martini Cadet in .357 with 1:20" twist barrel, fittex with Unertl scope which I use for ammo testing.
The best .38 Special match ammo and jacketed .357s will shoot inch groups at 50 yards. In .357 loads it handles up to 180-grain bullets accurately. Loads with 200-grain cast loads are less accurate, but acceptable. Cast bullets over about 215 grains shoot poorly and bullets over 0.90" long show yaw in the bullet holes in target paper.
I have a Win LW in 357 Max. with a 20 twist. I haven't played with it a lot but, I can stabilize a 358315 (208 gr) at 1430 fps with a 1" group @ 100. It will also take that same bullet to 1832 in the 28" barrel but at 2" grouping. Another good bullet for the 20 twist is the 35875, also 208 but PB. I've shot 3/4" groups with that bullet, breech seated.
The bullet alloy for all the groups was 22/1 lead/tin and the powder was WC820.
Frank
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |