i loaded about a 1000 rounds of 410 on a pounder kit & need to size the brass on the loaded rounds, would the lee loadall do, or do i need the super sizer? alot of $ difference thanks
i loaded about a 1000 rounds of 410 on a pounder kit & need to size the brass on the loaded rounds, would the lee loadall do, or do i need the super sizer? alot of $ difference thanks
Lee doesn't make a Load-All in 410. You could get a 444 Marlin reloading die set and a 7.62x54 shell holder and size them up. I use the 444 to resize brass shells. Another option is to get the resize ring from Mec and use it with a load all. https://www.ebay.com/sch/i.html?_fro...+ring&_sacat=0
Ether get creative or $$. One more option is to find an old Mec JR and then buy the conversion kit from ebay/mec. https://www.ebay.com/itm/27321713030...3ABFBMiILl05hj
You'll still be looking at $200 or more
thanks will give it a try, happy trails
Since they are loaded I think you would need to use a Mec Grabber typer sizer. (segmented fingers) Could make a .410 sizing ring; the trick would be to get the ring off a loaded shell using a loader and not buckling the shell or messing up the crimp when stripping forces are high. When using a sizing ring you would probably need to take the decapping pin out of the sizer and maybe use the primer station to strip the sizing ring off. I think this may work on my DL-266 410 loader not sure if I could with a Mec 410. Would want the sizer to support the whole shell so it would not buckle the loaded shell when stripping it off
I do not recall where I saw this; someone machined delrin or UHMW tubes that would the 410 shells would slip into and he would use a 12 ga LEE Load All to load the shells. Kind of like a LEE Loader combined with a Load All.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |