Finally got some 9mm cast with a Lee 120-TC 6cav mould. Thanks to many on here who have helped with all this wonderful casting. The smokes Carolina blue didn't coat too well this time but worked well on some others. Maybe the humidity was off that day. Didn't notice any leading though. They are dropping about 124gr and I can feel resistance as they pass through a .358 sizer for my 38/357 bullets and the 9mm doesn't fall back through after I lower the ram. Tried with 3.6-3.8 GR of titegroup and I'm going to settle on 3.8 at a 1.065 coal for my Kahr CW9. Special thanks to Dusty Bannister for his help.