I have got lucky and found a good source for free range scrap. I have picked up about 200-300 lbs the last few trips. I have always use strait ww and hitek with no problems ever in 9mm or 300blk. I have 1000 lbs of ww but want to try to switch to strait range scrap for 9mm to save the ww for 300 blk. I load tons of 9mm and some 300 blk. I was wondering if hitek would work for strait range scrap in 9mm or would i be better if i switched to pc? Molds are noe 135 9mm and noe 225 30cal both are groove less. I usually cast 30 lbs or more at a time so tomorrow morning i am thinking of firing up the lead pot and getting her done. Thanks