Don’t be this guy.
Well that was pretty boring.
The Bird of Time has but a little way
To fly-and Lo! the bird is on the wing
Good video, sir!
--Wag--
"Great genius will always encounter fierce opposition from mediocre minds." --Albert Einstein.
Try drilling a small hole in the top of the pumpkin and filling it with water, never tried it but I suspect it would be like shooting water filled milk jugs
With a little more color.
"Luck don't live out here. Wolves don't kill the unlucky deer; they kill the weak ones..." Jeremy Renner in Wind River
I just can't do Any Youtube video at all...More B.S. than Content!!
It is fun to shoot something with some history behind it. I feel the same way when I shoot some of my father's and father-in-law's guns. I have a 1911 that came from my grandfather, M1 from FIL and he also gave me a Mauser broomhandle that was given to him by a participant in the Boer wars.
Boring? Well, to me it is boring watching other people shoot. I want to be the one doing the shooting
Congratulations on enjoying the firearms. It really is something not many get to experience.
Thanks for sharing. I enjoy shooting "family" guns.
During rattle battle You won't hear the ping. A friend got in 6 Garand rifles in 1984 and we needed to shoot up military ammo to reload. We would shoot a rifle till the oil was cooking out of the stock, switch guns and keep shooting. Out target was a small boulder at 200 yards and we reduced it to gravel. Next day I couldn't lift my arm! Big fun!!!
The Garand is designed to load with one hand. That's why the end of the Op Rod has a curve in it. You place the fleshy part of your hand (below your little finger) in the curve to hold the op rod, push down the clip with your thumb. then lift your whole hand all together to get out of the way and release the op rod.
Hick: Iron sights!
Start the loaded clip into the magazine w/o depressing the follower with the right hand with the thumb on top of the clip [properly loaded clip will have the top round on the right side]. At the same time put put the palm side of the right had alongside the oprod with the fingers extended along the right side of the stock and, most importantly, the knife edge of the right hand just touching the curved portion of the oprod handle. then push the loaded clip into the magazine well. If the oprod goes foreword after insertion of the clip the oprod will then push the hand and the thumb out of the way.
Larry Gibson
“Deficient observation is merely a form of ignorance and responsible for the many morbid notions and foolish ideas prevailing.”
― Nikola Tesla
The Garand is a great rifle. I had one for years before giving it to my younger brother. No one on this thread has mentioned it yet, so I think I'll throw in my 2 cents. The Garand was designed to operate using ammo that fell into a specific spectrum of bullet weights, powder charges, and powder burn rates. Too light of a charge and the action wouldn't cycle. Too heavy a charge, or too slow a powder, and the action would actuate with enough force to bend the operating rod or cause other problems. The action itself is rock solid and very strong. The weak link is the mechanisms that cycle the action. So long as the ammunition falls within acceptable parameters there will never be any problems. It's when you try to use hotter loads than the rifle was designed for that you can get into trouble.
If you keep your handloads around 150 grain bullets at 2700 fps using IMR-4895 you'll be solid gold. You probably shouldn't use over 180 grain jacketed bullets with service loads. (though heavier cast bullet loads will be fine) With jacketed service loads faster burning rifle powders as well as really slower magnum powders should be avoided. Middle of the road burning rate rifle powders are what work best in the Garand. It's a really versatile rifle, but it can't be loaded over a broad range like a bolt action. You should really look online for information about "reloading for the M1 Garand", because there are lots of loads that work great in it, but others that can hurt it.
I was in junior ROTC in high school. Closed the bolt many times as described above with no problem. While in Basic I did not move my thumb quick enough. I had that mashed fingernail for months. No problems since. I love the M1. Just a note, all the M1s issued to the students (Yes we were each assigned one) were fully functional (yes including firing pins) and we had Several BARs and Mi911s all functional. I graduated in 1956 so I guess time change.
Never got a Garand thumb from a Garand in maybe 5K fired. I did get one with an M-14 single loading during the 2 rounds of single loading for sighters for 300yard rapids. For whatever reason the bolt didn't catch on the bolt stop. It did catch on the mag. follower. When I thumbed the round into the mag it caught me big time.
2nd Amendment of the U.S. Constitution. - "A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed."
"Before you argue with someone, ask yourself, is that person even mentally mature enough to grasp the concept of different perspectives? Because if not, there’s absolutely no point."
– Amber Veal
"The Highest form of ignorance is when you reject something you don't know anything about".
- Wayne Dyer
Back in the days, was trying to find to shoot A rifle at the range ,liked the Galil in .223, but later found out , it was a cartridge killer , one day i was given a stock M1 , man i was sold within 1 clip. never went back for any rifle , have standard one , 1943 and a M1C 1944 , with a pristine barrel. still reloading for that one with a 150 grain flatbase 30 30 point. and yes i shot at 100 meters consistently trhough te same hole. not any more sadly , a bit older so to speak , over the hill ,eyes tremors and so on..
That’s the thing about the Garand I really liked. It has just the right amount of recoil to where, when it comes down out of its mild recoil, the sights line up perfectly for the next shot. Anyone out there inside of 200 yds. would have been in serious hurt. Very pleasant gun to shoot.
It is a shame you couldn't have spent more time with you father when he was alive, I know time gets in the way.
There are many stories and experiences I shared with my dad but many more that are lost to time that I feel sad to have missed out on.
I guess everyone must feel this way.
At least you and I had the privilege of knowing our fathers, something many people these days do not.
I have recently received a bit of history from my own dad, a fox skin, made into a stole for a woman to wear.
My wife thinks it is horrible. I love it.
Being past any hanky-panky due to our advanced age we no longer share the same room, so I have the dead fox on my headboard.
The only gun my dad kept was an old single shot 12 gauge that he was quite proficient with, if he ever missed, I never saw it.
He did have a single shot .22 at one time but since my mother was a better shot with it, he gave it to the neighbor's boy.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |