Powder coated bullets pics only

[Seabee75]

My first batch ever. Cheap toaster oven, Prismatic Powders Bronze Chrome powder. Shake and bake method. .452 dia. 255 grain. I don't think they turned out half bad.

[Recycled bullet]

[Dom]

Bullets for 25-20 73gr & 44 310gr. Guess which is which?

[shootingblanks00]

Here's mine.
44 Mag


357 & 9MM

[Recycled bullet]

[stevo1911]

https://imgur.com/a/3flmH1l

[pdgoutdoors]

What mixture did you use for this? It looks amazing.

[Budzilla 19]

Did a few 38-165 boolits today! Flame Red,Flame Red and Carolina Blue for a type of cranberry color. Finally, Traffic White and a bit of Flame Red! I call it “Peppermint candy”. All Smoke4320 powders. powders. 2k down, 2k to go.

[TXTad]

https://imgur.com/a/3flmH1l

Are those colors you have mixed, or do you buy them as they are?

[kjohn]

Thanks guys. It is a 4:1 mix of Eastwood clear gloss and Eastwood black gloss. I like my lead bullets to look like lead bullets. Got the idea from a previous poster.

One of my first "successful" coats looked similar. It was Eastwood Silver Vein.

[kjohn]

I cast a bunch Jan 24 and PC'd them next day. I washed them all in acetone and mixed them in a #5 ice cream bucket. That's two things I haven't done until yesterday.

[Budzilla 19]

Smoke’s Orange Brown and a hammer test of same.

[Grootjoseph]

I coat with a color that I like and works. For these I shake then just flash in the oven (powder molten plus 5 min) then shake in large Ziploc while still fairly hot with Mica make up powder (from Amazon) that will compliment the base coat . Use less than you think you need and then only half of that.Then back into the oven for a proper cure
The second photo is just a compression spring around the resizing stem to make resizing a breeze

[chrispy]

[Recycled bullet]