Anybody out there having a set of calipers and a Hornady Bullet Comparator 35 caliber bushing that could pass along some info for me? I want to turn a 35-cal bushing but don't know the exact ID of the 35-cal bushing. Anybody? Thanks, Greg
Anybody out there having a set of calipers and a Hornady Bullet Comparator 35 caliber bushing that could pass along some info for me? I want to turn a 35-cal bushing but don't know the exact ID of the 35-cal bushing. Anybody? Thanks, Greg
By "Exact", what are your qualifications?
ID gauge, or dial caliper? I have second handy, and should have the bushing.
It's a comparative measurement device, should not have to be exact, I don't know what Hornady tolerance range is.
Hey TurnipEaterDown, thanks for the response. I shouldn't have used the word 'exact' in my post. A dial caliper reading would be great. Thanks, Greg
On the Stoney Point 35-10 insert (Hornady bought the Stoney Point tool rights), it measures a smidge over 0.349" w/ my caliper.
The 30 insert measured a smidge over 0.297", and the 37 right in at 0.366". Maybe these other two give an idea of tolerance, seems like they are just short of bore (not groove).
Perfect. Just exactly what I needed. Thanks so much for the help. I appreciate your effort. Greg
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |