just got a co2 pistol & instructions say to put a drop of oil on the tip of the co2, can any type oil be used?
just got a co2 pistol & instructions say to put a drop of oil on the tip of the co2, can any type oil be used?
I'd use Pneumatic Air Tool oil. It was made for air tool orings. Should work just fine for your air pistol.
redhawk
The only stupid question...is the unasked one.
Not all who wander....are lost.
"Common Sense" is like a flower. It doesn't grow in everyone's garden.
If more government is the answer, then it was a really stupid question. - Ronald Reagan
pell gun oil, but i have been told on air gun forums that it is just regular sae 10w non detergent motor oil -
never pick a fight with an old man - if he is too old to fight he will just kill you -
in this current crisis our government is not the solution , it is the problem ! -
ILLEGITIMI NON CARBORUNDUM
as they say in latin
thanks, air tool oil is close to pure
You want something that will not diesel, ie ignite, at 800psi.
Airtools operate down around 150psi, no idea if those lubes are safe at higher pressure.
PCP airguns operate above 1,500psi, so any oil designed for them should be safe.
No idea at what pressure mineral oil will diesel.
You could probably use just about anything. Even petroleum jelly.
In the absence of air (O2) dieseling will not be an issue.
45_Colt
Let me dispel some common myths about O-rings and oils. Rubber gaskets will deteriorate when exposed to petroleum based oils. Most gaskets are made from synthetic EPDM materials created for different applications by being formulated for those applications. Use some caution when exposing gasket material to just any type of oil.
got some rws air gun lube on the way, just thought there was a cheaper option
I have and liberally use RC shock oil. Its silicone oil and cheap
And nothing else, except some lube a big air guy sells that I started with.
I got this kit when I got one of my Crossman CO2 Pellet guns. It had a little tube of Pelgun oil some .22 cal felt wads and a CO2 cylinder that I think had oil in with the CO2 but I am not sure as I used it and disposed of it. I still have many of the felt wads and the tube of Pelgun oil. Since you only use one tiny drop with each CO2 cylinder and a drop on a wad. The little tube lasts a long time. I am sure there are other oils but I can see why I would be looking for an alternative.
Tim
Words are weapons sharper than knives - INXS
The pen is mightier than the sword - Edward Bulwer-Lytton
The tongue is mightier than the blade - Euripides
I very well may be quite wrong on this, but two (old timers) sages at club strongly profess that some oils in contact with rubber is a big "no-no"! They suggested that with "new" C02 arms this is kind of moot, as pretty much all their seals and O-rings are synthetic material. However -- in "my" day -- e.g., I started with (and still have) a Smith & Wesson 78G CO2 pistol -- using the "wrong" oil would do lots and lots of damage. Now -- I'm not smart enough to know what is an OK or maybe-not oil -- even after reading Tom Gaylord's (Pyramid Air) treatise on the subject -- but I have been assured the RWS stuff is safe for ALL. ...and, applying one drop to the tip of each CO2 cartridge? I can't imagine anyone using up an entire bottle of the stuff in a lifetime or two .
geo
NO PCP gun can Diesel !. Period.!!!
The Air is already compressed, when released it drops in temp. It doesn't compress behind the pellet. The highest pressure that will ever be seen is in the reservoir. It is all down hill from there. Just like the pellet is going the fastest it will ever go at teh Muzzle it only slows down as it travels down Range.
A Spring powered gun physically compresses the air behind the pellet. The Temp of the Air increases, hence Dieseling can occur if the Air temp exceeds the flash point of the oil.
That's all there is to it.
Randy
"It's not how well you do what you know how to do,,,It's how well you do what you DON'T know how to do!"
www.buchananprecisionmachine.com
Randy is correct.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |