Hey guys and girls I know there's some out there. I've got a 2 part question about 10mm casting. I've picked up a Glock 20 for woods roaming and field use. It's mostly for self defense against the usual critters in my area, meth heads, feral dogs and here lately feral hogs . So far all I've got are factory self defense hp jwords but being a caster I really want something with a wfn in the 200grn range moving about 1200fps.
I've been thinking about something like the Accurate 40-195G that I've heard mentioned here . I'm mostly looking for something I could load down to 40 s&w levels and plink with or crank it up and hunt with it. I'm fine with have a couple of different molds if that's what's needed but if I could get along with one that would be great. I do have an aftermarket barrel on the way as well.
The second problem I have is the only dies I have are a new set of RCBS 10MM/40 S&W dies I picked up last year in anticipation of getting a 10mm. The seat die has the swc stem but it just occurred to me today to measure it and the flat portion for the nose only measures somewhere between .275 and. 295. The edges are rounded so it's hard to get a good measurement. That would make it too small for the aforementioned mold that I was looking at. Sorry for the long winded post but any help would be greatly appreciated I've been scouring the forum all week looking for ideas thanks.