Hello guys, I greet you from Argentina. I tested a load yesterday with my taurus 2". I am using the LEE-358-105 and 4.2 grain from win 231. and surprisingly for me the impacts were 15cm low. could it be because of the weight of the boolit?
Hello guys, I greet you from Argentina. I tested a load yesterday with my taurus 2". I am using the LEE-358-105 and 4.2 grain from win 231. and surprisingly for me the impacts were 15cm low. could it be because of the weight of the boolit?
Yes try a bullet 155 grain or heavier
Sent from my SM-G930T using Tapatalk
I agree. 158 gr. is sort of the .38 Special standard, and your pistol's sights are probably calibrated for that weight.
DG
Thank you very much, I am considering purchasing a LEE-358-158 RF mold. What is your opinion on that mold?
It is a good bullet-mould to learn how to shoot and reload and cast for that revolver.
Sent from my SM-G930T using Tapatalk
I have around 10 Lee molds and that is my favorite!
If you don't read the newspaper, you are uninformed. If you do, you are misinformed.
- Mark Twain
When a man loves cats, I am his friend and comrade without further introduction.
- Mark Twain
Greetings! I know this is a little like comparing apples and oranges, but light bullets out of the 38 special are possible. At least out of my 4 inch model tan Smith and Wesson. I wanted a light load to break my wife into pistol shooting and I managed to find a Lyman 358345 swc. It lists at 113 grains but with my alloy in this mold there more like 110 grain. It took a little work but I wound up with a couple of pounds of SR 7625 powder and I worked a load down to 3.2 grains. I got a Tell you it’s a real hoot to shoot! And at that load it’s got the report and the recoil not much more than a 22 Long rifle. I need 15 yards I’m talking about the same whole accuracy. I know 7625 is no longer manufactured and have no idea what’s available to you in Argentina. But if you’re looking for a light plinking load for a 38, try looking through some older manuals at different powders. When I first started out with this bullet I was definitely not happy with the results with hotter loads. Like I initially said I realize the Smith and Wesson isn’t a Taurus and there is a difference between 105 grain and 110 grain. But if you feel like putting the time in and have other powders available to you you might just be surprised changing things around a little bit. If your plans are using this for a self-defense round I would definitely go as others and said it someplace between 150 and 158 grain boollet weight. Lee has 158 grain round nose boolet that I’ve had good results with. Hope any of this helps.
Long, Wide, Deep, and Without Hesitation!
Poppy here in Argentina we do not have much availability of molds and powder machines. you get some lyman and we have a LEE importer
This one is a Molina, but I also have a Rigaud. I thought you might like to see one because of your forum user name. It has nothing at all to do with your question.......
DG
DG[/QUOTE]
It makes me very happy to know that you have a weapon manufactured in my country in times of glory of the national armory industry
At what distance?
I think that if you modified your sight alignment (rise the front above the rear
in such a way that the bullets were to) strike the center of a 9-inch paper plate at a distance of 15 yards,
then you could maybe take very fine paint brush and paint a line across the front site
showing where do you want it to line up in the rear, in the future you could repeat the shooting
just by lining it up (the mark on the front site with the outline rear sight.)
9 inch=228 milimeter
15 yards=13.7 meter
15 centimeters=5.9 inch
If your front site has serrations this process can be extremely precise.
You'll find that different bullet weights, powder charge weights and sometimes
powder type can make a big difference in elevation and sometimes windage at different shooting distances using small fixed sighted revolvers. I am assuming your revolver has fixed sights machined into the top strap and something in the front.
If you are using a Trijicon RMR then I would say adjust the sights
If you tell us specifically what type of revolver you have and and its condition I'm sure that we can recommend some good target loads bearing in mind what you may have available in Argentina.
The good news is 231 is an excellent Target powder for ultra light guns.
Sent from my SM-G930T using Tapatalk
The Lee 105gr is a great little bullet. I use it in .38 Special and 9mm. My fixed sight 4" M&P M10 prints low with it as well, so I use it in our M15 and M67 with their adjustable sights. I like 5grs Bullseye- peppy but light recoil.
358429- great pics and advice! I've used bright nail polish on the front ramp down low for low shooting guns.
And another salute to Argentina and the OP
Sent from my SM-A716U using Tapatalk
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |