In the morning I was making some .30 cal slugs for my condor, I built the press following the forums post, it works like a charm. I had to experiment a lot with dies, pins, punches, ejectors... but eventually got excelent results. Yesterday I changed the press arm for a longer heavier one. Today I started making my slugs far easier due to the longer arm, after a while I noticed the lead was flowing into the central hole of the die (where the ejector/hp rod rides). I was expecting a broken rod but it was intact. The resulting slugs have a cylindrical protusion insead of a hollow cavity. I tried different ejector shape, lenght same result...what can be wrong? besides the longer arm theres been no change on the press/dies/punches . IŽve made some 500 slugs without a problem (after initial experiences). I use pure lead, I made the dies and work OK, ejectors are made of spring steel or stainless steel. Any ideas?