Reloading EverythingInline FabricationRepackboxLee Precision
Titan ReloadingRotoMetals2Snyders JerkyWideners
Load Data MidSouth Shooters Supply
Results 1 to 4 of 4

Thread: First PPB fired!

  1. #1
    Boolit Buddy
    Join Date
    Apr 2008
    Location
    Minnesota
    Posts
    127

    First PPB fired!

    Ok, I finally got to the range and fired some of my BACO 550grn PPB's in a Sharps 45-90 (Italian). Accuracy was good once I got zero'd but I didnt have a lot of time to play. Paper patches blew off at the muzzle, some still 'whiteish' shreds and some black, which I'm guessing is from blow-by or charring. Wouldnt a thought I'd have blow-by with 40:1 alloy wrapped to bore size. Maybe I'm a bit too narrow with the onion skin wrap. Veg wads were found about 20-30 yards downrange, some with the center of the grease cookie still intact. The holes in target were nice and round. I hope to get out again today before The Storm of The Century gets here.

    Update: pulled the paper off the remaning 550 grn'rs as they were a bit sloppy at .447, not .450, and wrapped up 540 grn BACO (.440's with a slight taper), same pattern patch wrapped those to .450 and they fit nicely.
    Last edited by zampilot; 03-11-2009 at 01:29 PM.

  2. #2
    Boolit Master

    Join Date
    Apr 2008
    Posts
    4,947
    Way to go!!
    I know how it feels when it works.

  3. #3
    Boolit Master
    Join Date
    Jun 2008
    Posts
    1,592
    You won't know if it is blow by until you pick up the patches and inspect them. The outer layer of the patch will often be black but does not have to be scorched or torched. If it is, you got issues. But look first.
    Brent

  4. #4
    Boolit Buddy
    Join Date
    Apr 2008
    Location
    Minnesota
    Posts
    127
    I'll look closer Sunday morning.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check