Hey Guys,
So I picked up this 2020 mfg Alaskan, owner said he won it in a raffle, bnib, hasn't shot it so I figure the carbon is from the test fire at the factory or maybe he he did pop a few but either way I wanted to ask if others noticed their cylinders doing the same.
The cylinder will touch the forcing cone when closing. Now I noticed their is some displaced metal on the forcing cone already, I received her in that condition.
Other small imperfections aside I was scratching my head on the forcing cone. There is a little lateral play in cylinder so I can pull it back enough to close and not touch the forcing cone. I bet there's a cylinder shim out there to fix this. Will have to see how she shoots if I can find some flippin' ammo or get some reloading done. At least the BC gap is nice and tight