Last edited by hawkenhunter50; 01-01-2021 at 04:06 PM. Reason: attached photos
I remember seeing pictures of some pretty strange bench rest setups from the 'old' days.
I believe they were used on WALL GUNS, to hook them to the wood ramparts.?
Picture would help some where used to steady the gun into a rest kinda like we use cross sticks today.
Simper-Fi
I started out with nothing and I still have most of it left.
Paralyzed Veterans of America
Looking for a Hensly &Gibbs #258 any thing from a two cavity to a 10cavityI found a new one from a member here
Any idea where it was you saw these pictures? I haven't been able to upload pics here for a while now. I will try again in the next day or so.
Basically its a metal hook at the end of the barrel, maybe hook isnt the right word. Almost like a letter C that looks like it was made to rest the end of the gun on something.
I have seen the wall guns with the hook and what I am talking about is different, at least in looks.
I once saw a special on the "outdoor life network" about a particular kind of muzzleloader competition involving specially built guns called "chunk guns", some of which match your subscription. The hook helped stabilize it on the wooden slab rest called the "chunk". They shot round balls at, if I remember correctly, 500 yards.
Last edited by Thundermaker; 12-31-2020 at 10:56 PM. Reason: My autocorrect has bad grammar.
Pics attached to original post. Looks like I got them working. If you need any other views let me know, appreciate it.
Inline with what Thundermaker said, it strongly resembles the modern version of a quick release sling attachment.
Except in this case it's much more simplified, perhaps for attaching a type of sling using a simple D ring or a rectangular ring.
The modern ones have a much more complicated design. with a push button that disengages ball bearings which fits into a metal housing attached to a rail in the forestock of the gun.
The makers call it a quick detach sling swivel.
The reason for the quick detach on a modern heavy target gun is that the sling is directly attached to the arm of the shooter's jacket with a buckle, and is looped around the bicep like a belt, which helps support the rifle and the shooter's position.
When finished shooting, the sling stays wrapped on the arm. and it needs to be detached from the gun when the shooter wants to separate from the gun.
That hook makes it easier to quickly attach and detach the sling.
The modern target guns aren't as heavy as chunk guns, but I would guess a similar purpose, to help maintain a consistent position on the stock when sighting the rifle.
And probably also to help to keep the muzzle steady once the trigger is pulled.
The muzzle in the photo doesn't look like the heaviest type of chunk gun.
There's probably different classifications of guns depending on their weight.
How heavy is yours?
https://www.amazon.com/Magpul-QD-Qui.../dp/B00HKBSQ26
Magpul Industries Quick Detach Sling Swivel, Model Number: MAG540
Last edited by arcticap; 01-01-2021 at 05:13 PM.
Is that flush with the end cap ? Or does it go under the end cap? Could it have been added after the gun was built?
I started out with nothing and I still have most of it left.
Paralyzed Veterans of America
Looking for a Hensly &Gibbs #258 any thing from a two cavity to a 10cavityI found a new one from a member here
Makes me wonder if the hook is original to the gun.
If their bench had a metal rest for the barrel it would tear up the stock upon recoil. So they made a metal glide that would sit on the rest. Also add a little extra height for aligning sights. Check here https://www.muzzleblasts.com/archive.../stutz_1.shtml
Could it be for locking the gun into a rest/support by pushing it forward?
NRA Benefactor
About how much does the gun weigh?
Heavy chunk guns can weigh 80 - 90 lbs or more.
Then there's lighter ones such as yours looks like it may be.
I would say with the curve of it and the smoothness of the metal edge it would allow the rifle to move backwards easily with recoil. Bench or chunk guns and I have several including one made by the great Wilburn "Web" Terry that they sit on a smooth flat surface and move back and forth but not up and down as little as possible. The chunk gun shoots usually go out to 40 rods or 220 yards with patched round balls. The patches are generally specially coated with spray lube or ????? secret stuff! Do you know the caliber and barrel twist rate? My chunk gun is 50 caliber and 1 in 48 twist and my other bench guns are all 45 caliber either 1 in 16 twist or a gain twist start at 1 in 24 and at muzzle 1 in 16. The chunk guns also have a normal rear stock, not the flat bottom rear stock like the one in Ken's picture that rests on the hand for support. If you do a search on chunk gun shoots especially the Sargent York one there are some pictures of massive muzzle loaders that shoot to 40 rods. Here's a link to get you started: https://prwarner.wixsite.com/sergent-york-shoot
By the way if you shoot that gun you'll need a set of bib overalls, white shirt, black tie and a fedora!!!!
John
Last edited by oldracer; 01-01-2021 at 11:57 PM. Reason: adding
Gun is right about a 60 cal, haven't checked twist yet and weight is 18 lbs I was told. However haven't checked weight yet myself. Thanks for the links and info so far.
Likely a foot that interacted with a specific stand for that rifle. When pushed forward into battery it was a solid stop to sit against for repeatability. (Guess)
I only have a few pics of mine, I have one more similar to yours but no pic in phone
All of my bench or chunk guns have variations of feet or rests
Last edited by Plastikosmd; 01-02-2021 at 11:26 AM.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |