So I very carefully took a rossi 92 apart (https://youtu.be/rKAucKBnbes and http://www.leverguns.com/articles/ta...ield_strip.htm) were the resources I used.
Cleaned it. But now that I've got it re-assembled I find the the hammer wants to drop into half cock on the initial pull. Instead of the normal, smooth pull into full cock, then pull the trigger and ease the hammer into half cock. Now it is happy to stop in the half cock.The trigger also doesn't feel like it did before I cleaned it. The obvious thing to do is to take it apart again and re-assemble it again and hope that sorts it but I was hoping one of you more experienced guys could tell me what I likely screwed up. Throwing in the towel for tonight.