Winchester/miroku 1892 in 357 mag.
Uberti 1873 in 357 mag.
1980's Browning 1892 in 357 ( also interested in the twist rate for these, not much info out there)
Would be very interested to hear any measurements.
Winchester/miroku 1892 in 357 mag.
Uberti 1873 in 357 mag.
1980's Browning 1892 in 357 ( also interested in the twist rate for these, not much info out there)
Would be very interested to hear any measurements.
Winchester says
short rifle is 26 inches
trapper is 18 3/4 inches
carbine is 18 3/4 inches
Beware of a government that fears its citizens having the means to protect themselves.
NRA Patron member
Veteran
strange but your original post asks about Winchester/miroku 1892 in 357 mag. first one listed even
Beware of a government that fears its citizens having the means to protect themselves.
NRA Patron member
Veteran
Explain twice for me? Nope, never owned a 38 in those calibers
Regards
John
Ah I see the mods are deleting my replies again without indications why. I said to Ed Harris the atmosphere here is not what it used to be, and suggested I correspond on survival boards instead. Thats me done, I will leave you to your devices.
Yes, we have deleted a couple of your post because they were in bad taste. I brought back one of the "zingers" (yep, we deleted it) where you suggest a collector who spent $745K on a gun be burglarized and pistol whipped....
Any post such as the above will always be deleted.
"The only way to deal with an unfree world is to become so absolutely free that your very existence is an act of rebellion."
- Albert Camus -
as far as slugging bore. ive yet to do it, ever. my passion is lever guns. I size bullets as large as possible as long as they will chamber and there is a lube size die. in 357 mag gun I size to .360 which chambers with no problem in starline brass, 44 mag I would like to lube size to .432 but larges die I can find is .431, 45 colt I only have one lube die and it is .454.
my win trapper bore is 357.i had a squib load so i pushed it out and measured it .i only size gas check boolits to 358 ,plain base i shoot as cast.
Mick I am just a bystander but the tone of your reply to shadowalker suggests an attitude readjustment needed - aussies use the language differently than them in the north - you likely mean no harm by talking straight but it takes on a whole new and dangerous meaning as it crosses the pacific. Sense of humour is different too, aussies get subtle jokes (like the english) americans need to be hit over the head to get it. Mate of mine form over there summed it "we are two like countries SEPARATED by a common language"
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |