is there a supplier that has a 9mm, HP, around 115 gr, prefer 4 cavity mold in stock?
looked at MP, Lyman, lee, NOE...
did i miss a manufacturer that makes a decent mold
is there a supplier that has a 9mm, HP, around 115 gr, prefer 4 cavity mold in stock?
looked at MP, Lyman, lee, NOE...
did i miss a manufacturer that makes a decent mold
This is a great HP mold. It’s a little heavier than 115, but it is in Stock.
https://www.mp-molds.com/product/mp-...o-lube-groove/
No problem, they also have the lube groove version in Stock as well.
https://www.mp-molds.com/product/mp-...5-hp-pb-4-cav/
can i resize from .359 to .356... and should i do it before and after Powder coat or will it work just after PC
thanks
Also, for whatever it’s worth of the two molds they both are great, but I prefer the one with the lube groove. If you ever run out of powder coat you still have an option to lube traditionally and also I believe the lube grooves when sizing down gives a place for lead to move. With that said either will be great though.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |