Drilling out the center of the bullet worked great for me, after I tried the “quick and easy” methods. These just made the problem worse.
I was firelapping a pitted military bore, was too stingy with the powder, lol.
Drilling out the center of the bullet worked great for me, after I tried the “quick and easy” methods. These just made the problem worse.
I was firelapping a pitted military bore, was too stingy with the powder, lol.
Pleased to say I got it out! I went around to a friend who has a MAP blowtorch and a couple of minutes heating the barrel around where the bullet was and it simply pushed out. One moment it was stuck solid, the next it just slid down the last 8 inches of the barrel and out. Bore scope shows no sign where the bullet was so all is good. Bullet still has the paper patch intact.
The unpatched bullet is an as cast Lee .309-200 what the bullet originally looked like.
Anyway, thank you for all your suggestions and comments on this matter.
Last edited by andrew375; 06-04-2020 at 02:40 PM.
"Consciousness is a lie your brain tells you to make you think you know what you are doing." Professor Maria Goncalves.
If liberty means anything at all, it means the right to tell people what they do not want to hear. George Orwell.
WooHoo! I'm glad you got it lined out easily.
Sent from my SAMSUNG-SM-G930A using Tapatalk
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |