Any KYDEX gurus?

[Old Ironsights]

My CCW rig just broke its clip. I've been able to rig up a psudo-replacement but it's not really long-term viable.

My GoogleFu has failed me and I can't find anyone who does custom Kydex accessories.

Anybody got any ideas for me?

[scrapcan]

Fist Holsters might be able to help you.

[Willbird]

crossbreed holsters makes their clips from Kydex I believe ?

[Old Ironsights]

I checked with crossbreed. No go. They are changing some design elements and are getting away from kydex clips. Dunno why.

I'll check on Fist if nobody else here plays with the stuff.

[bobk]

What kind of gun?
Bob K

[Old Ironsights]

SP101.

The holster is fine, it's just the clip that's broken.

[Willbird]

There is a guy over on Ohioans for Concealed carry that makes Kydex Holsters

Pete10

[tommag]

williamgoldberg bought some Kydex supplies and makes his own stuff. You might try sending him an e-mail through cb. He doesn't check in here very often, hence the e-mail. He could at least point you in the right direction for supplies.

[AZ Pete]

I had a copy of a tutorial on Kydex fabrication, but cannot find it now. However, here is a link to some Kydex material that might help you out in making your own loop.

http://www.knifekits.com/vcom/index....main.htm~smain

But, if it were me, I would make a loop out of leather.

[Old Ironsights]

I had a copy of a tutorial on Kydex fabrication, but cannot find it now. However, here is a link to some Kydex material that might help you out in making your own loop.

http://www.knifekits.com/vcom/index....main.htm~smain

But, if it were me, I would make a loop out of leather.

A leather loop defeats the purpose of a tuckable IWB holster.

[AZ Pete]

A leather loop defeats the purpose of a tuckable IWB holster.

not really, you will have to thread your belt through it, or put snaps on it is all.

[bruce drake]

If you are handy, you could replicate the clip out of metal and you shouldn't have to worry about having to replace it anytime soon.

Bruce

[Powderpacker]

There was a young guy at the last few Valpo shows that makes Kydex holsters and sheaths at the shows 'while-you-wait' . He does quality work, reasonably priced and he's not happy 'till the customer is happy so I think he would repair your holster to your specs. The next Valpo show is 2/21-22. You might check with Dunes Rifle and Pistol Club to see if he's signed up for that show . I think his company name is 'Shark-tec' .
www.dunesgunclub.wordpress.com