a zipper that comes open after it gets zipped shut.
I have that problem with one of my favorite gun cases
I will shut it and it will sometimes open up and nearly drop out the rifle
so I carry it from the bottom
any cures for this?
a zipper that comes open after it gets zipped shut.
I have that problem with one of my favorite gun cases
I will shut it and it will sometimes open up and nearly drop out the rifle
so I carry it from the bottom
any cures for this?
Hit em'hard
hit em'often
I would buy a hard case large enough to accommodate your favorite zippered soft case...
I understand, I get almost as attached to a good case as I do the gun I put in it. You might find local laundry/dry cleaner that can replace the zipper. We have a lady in town, I believe shes Vietnamese, she is real reasonable on stuff like that. She only charged me 3.00 to add a button hole and a button to a shirt. You might get lucky.
Examine the zipper action while closing.
If the zipper is not being closed securely by the pull tab, pressing the top and bottom of the closed end of the pull tab with a pair of pliers may help (don't over do it.)
If the the zipper coil is broken or there are teeth missing then replace the zipper.
Just because change doesn't make a difference doesn't mean that change is bad.
Replacing the zipper is the only fix in most cases.
[The Montana Gianni] Front sight and squeeze
What makes a gun case become a "Favorite?"
Personally, if a zipper failed, or nearly failed and nearly dropped a gun, that case would be thrown in the trash faster than a knife fight in a phone booth.
~~~~~~~~~~~~~~
“If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun.”
― The Dalai Lama, Seattle Times, May 2001
Not an answer to your question, but applying some Chapstick to a stubborn zipper helps.
Just knowing enough to do it, is not enough to do it right! -Taz
Zipper replacement is about five minutes.
Most everything is disposable or single use these days.
I'd fix a well made item before replacing with possibly inferior craftsmanship.
Good luck.
WebMonkey
Retired 19D
Psalm 91:9
Honda 919
Sometimes you can carefully squeeze the slider thing with pliers to tighten its grip on the chain part.
Other times, the teeth in the chain are just worn out.
Another solution:
There's still time to write a letter to Santa...……….
In school: We learn lessons, and are given tests.
In life: We are given tests, and learn lessons.
OK People. Enough of this idle chit-chat.
This ain't your Grandma's sewing circle.
EVERYONE!
Back to your oars. The Captain wants to waterski.
Anybody with a sturdy sewing machine can replace a zipper. Auto or furniture uphlstory, bridal shop, boat canvas, quilt shop. Ask around sombody local to you will know how to do it. Call the hobby stores where fabric is sold they might have a customer that hires out.
I understand sentiment. The beat up case my grandfather's shotgun was in is invaluable to me, likewise the stick he carved into a cleaning rod, and the magazine plug he carved when they restricted hunters to 3 rounds.
Local tailor shop has replaced replaced zippers in coat and shotgun case .
Usually when then start opening up after zipping they need replacement .
I bought heavy duty brass zippers from a place online ... Zipper Shipper
( zippershipper.com) .
Gary
Last edited by gwpercle; 12-12-2019 at 02:55 PM.
Certified Cajun
Proud Member of The Basket of Deplorables
" Let's Go Brandon !"
I go visit my Mother hand it to her. She rolls her eyes says things under her breath but smiles and says I let you know when its fixed. She retired from Flexsteel Ind. Dubuque, IA Just another reason to love my Mom
If it doesnt move and its supposed to, wd-40.
If it moves and its not supposed to duck tape.
For the key function we want the case to not open, so duck tape.
Or in my preference, gorilla tape.
Praise the Lord and pass the ammunition.
I believe that crimping it down a bit fixed the problem
Hit em'hard
hit em'often
oso's Pliers Squeeze fix has always verked for GONRA. (SQUEEZE TOO MUCH? - Open it up a bit with a knife, etc. No Worries!!!)
Leave actual Zipper Replacement to the Pros. (Bazoo's Vietnamese lady for example.)
You can buy replacement zipper "travelers" the part that moves.
I have fixed a couple of jackets with zippers that way.
My favorite solution requires another zipper. Like from a zippered pocket. At the top there is normally something kind of like a small metal staple that wraps around half the zipper. Undo both of those, take the unused zipper off, use it to replace the other one.
Normally it is the traveler that wears out first. Often cast of metal without a lot of strength or durability.
If they machined them from stainless they'd last 10 times as long. But that is not what they want. They want you to buy a new one.
Screw them, if you can.
My mom made me two rifle sleeves that I lost when my house burnt. I'd give anything to have those back. They were made of heavy fabric in a western print that once was a curtain left by a tenant in the apartment above work.
I just found this thread and tried oso's instruction for repairing a zipper on a small bag I always take to work. The zipper that refused to close now closes very nicely. Thank you oso. Now I have to hope I can remember this "fix" longer than several of the other cures I have read about over the years.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |