I picked up this 35 Remmy off the used rack at the local GS. I bought the Lyman 35 Short M Die. The Boolits are sized to .359" and the expander plug on the M Die mics at .3565" When I seat a Boolit, before crimping, I can easily slide the Boolit in and out of the case mouth with fingers alone.
My concern is that without a heavy crimp, a Boolit could get pushed into the case, in the tubular magazine. I have a few M Dies for other calibers, and have not experienced this low neck tension with them.
Should I make the M Die expander smaller?
Regards,
Jeff