Can the Lyman Mag 25's PID controller be turned up above 850 degrees
I thought that I've read somewhere that it can , i'm looking to run the pot
at around 870-880 degrees . The pot is set at 850 from the factory .
Any help is appreciated , Thanks
Can the Lyman Mag 25's PID controller be turned up above 850 degrees
I thought that I've read somewhere that it can , i'm looking to run the pot
at around 870-880 degrees . The pot is set at 850 from the factory .
Any help is appreciated , Thanks
I've heard you can but i don't know how to do it
Sent from my XT1650 using Tapatalk
Why would you want to run it that hot?
The LEE 32 cal 93 grain 6cav for one. The RCBS 32 -77-RN for another. And the tiny steel or iron 2cav .22 caliber 2-4cav molds.
I HATE auto-correct
Happiness is a Warm GUN & more ammo to shoot in it.
My Experience and My Opinion, are just that, Mine.
SASS #375 Life
Greetings
To adjust the temp setting you first have to remove the temp dial from its stud...just pull it to you and it should slide off,then look in the middle of the stud you should see a small adjusting screw in there...i believe that counter clock wise will raise the temp up...you only need to turn it am 1/8 turn to see the temp change...do it with a thermometer and watch for the light to go on and off.
Hope this helps
John J
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |