Can anyone point me in the direction of the specs on this bullet or if another company makes a clone of it?
Thanks
Can anyone point me in the direction of the specs on this bullet or if another company makes a clone of it?
Thanks
.
http://www.hensleygibbs.com/casting/...uld%20List.htm
This will give you the basic data for the H&G molds
Bumslie, Lyman makes a very close clone of the H&G #7 bullets, just don't know what Lyman call their bullet.. I make and use the H&G #7, have a 6 cav H&G mould
Viet Nam 11/66 to 3/68
PM sent
Sent from my SM-N950U using Tapatalk
.
The only thing different with the 356402 is the meplat is squared and not rounded like H&G #7
RCBS makes a couple of 124 grain molds for the 9mm. They have pictures of them on Midway if you want to see what they look like.
One is a TC with a flat tip another is a similar style with a rounded tip.
Short of custom I don't know of any H&G #7 clones. I have a NOE 358-128 that is similar that shoots & feeds well, actually it is a 9mm #68 design . The #922 & #925 Saeco is similar, but nothing that I know of that has that H&G round shoulder tapering into a round nose. I also have a Saeco #115 that shoots well and feeds flawless.
Flydad
Once you have tasted flight, you will forever walk the earth with your eyes turned skyward, for there you have been, and there you will always long to return.”
― Leonardo da Vinci
I have an H&G #115 mold also. I cast up a few hundred of the H&G 115's and have never loaded them, because after taking a good look at the design I understand why Hensley didn't like his #115 design. He didn't like the narrow band at the base and decided to widen the band creating a new 9mm mold and naming it H&G #331. he said this improved the bullets performance. The Saeco #115 appears to be the same bullet design as the H&G #331 and it is my go to 9mm bullet. Since I powder coat I prefer the bevel base; accuracy wise I can't tell any difference between plain base and bevel base, so each to his own.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |