JustBill,
I have the 357 dies as shown above in stock in my BTSniper premium offering. Not much point yet in making these in BTSimple when I have them already available on the shelf.
Send me a PM if interested.
Brian
JustBill,
I have the 357 dies as shown above in stock in my BTSniper premium offering. Not much point yet in making these in BTSimple when I have them already available on the shelf.
Send me a PM if interested.
Brian
BTX Star Crimp Die
Back in stock with new low price!
Click link below!
http://castboolits.gunloads.com/show...Star-Crimp-Die
also check in and say hello on my new face book page!
https://www.facebook.com/BTSniper-153949954674572/
The 357 AR already exists . Essentially a rimless 357 maximum loaded to AR15 pressures. Starline makes "223 basic" cases which are a straight walled 223 case. MDWS makes barrels.
https://mdws.forumchitchat.com/?forum=645266
The barrels were a "group buy" kind of setup but they decided to offer them as a semi custom.
I have a 16" one right now I got in "round 3".
Looks like about $280 for an 18"
https://www.maddogweapons.com/store/...e_Pre-Fit.html
I was just shooting a few swaged Lee 200 grain round flat....you know it is not a 5.56 when you send one of those down range at 1950fps
Bill
Both ends WHAT a player
https://www.maddogweapons.com/store/...e_Pre-Fit.html
From that link right there. I priced barrel blanks, and buying a reamer, can make headspace gauge.
The round 3 barrels were $325 delivered.....I can work voluntary OT so I just worked a weekend and ordered one . I fight between being cheap and practical ...I have done lots of bolt action barrels but have not yet made an AR barrel from scratch.
$280 is an even better deal..might be some shipping on top of that.
Both ends WHAT a player
What is the heaviest .357 max swaged. I'm tooling up to make .358 jackets from LC .223 brass and can only find 250 as the heaviest, I prefer as close to full Metal jackets for the AR I can swage, which means an open tip with the smallest meplat. Since I'm cutting the jackets from cases I can make them any length per run.
A ny info. Is helpful.
Thanks ,
Bill
That will depend on the gun they are being used in. The length is a limitation in an AR15.
Here is a decent lineup of stuff that will kind of fit , it was in a post somewhere about 35 remington bullet testing for expansion, the 357 maximum or 357 AR in a rifle can come pretty close to 35 remington external ballistics
here is the whole thread
https://www.suitorsgarage.com/gunstu...5rempart2.html
Both ends WHAT a player
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |