I started with Lee liquid alox. It worked okay, but didnt look real good nor dry real good. So I made some 45/45/10. It does much better as far as drying and looking decent in the finished product.
Well I got to thinking about it, I dont think i've ever seen the method I use to apply tumble lube elsewhere. Its quite simple, so I thought it'd share.
I put the bullets in a ziploc bag, pour on some lube, close the bag, and knead it until the lube is thoroughly applied. It coats the inside of the bag, and all the bullets in a minute. Clean, easy, and fast. I open the bag, dump the bullets out on paper plates (also used for targets) and let them dry.
~Bazoo