They are getting a regular workout for sure! Ive already loaded and shot around 500 cast boolits through the rifle!
They are getting a regular workout for sure! Ive already loaded and shot around 500 cast boolits through the rifle!
Thats the plan! All in a 50cal ammo can. Gonna be around 300 270Win cases, 300 lubed and checked boolits, primers, 310 tool and dies, a powder funnel, travel size Advil bottle filled with graphite for neck lube, and a container of powder. Im thinking Tupperware for the powder container, but I'm open to suggestions. All my powder is bought in 8lb jugs. The loading block is a styrofoam insert from a box of factory 45ACP.
Is there anything else I might be missing or that might make my time easier?
I use these for BP in the field. https://www.amazon.com/dp/B079X3BJFH...&pd_rd_w=ya7F3
Might work ok for powder in your portable reloading kit.
I have been trying to expand mine for almost two years... I have one corner of the basement, but its gotten quite full. I built a pantry/ storage room of sorts for the wife two years back and bought extra lumber. I built that storage in opposite corner and it left 17' between the two walls along one end of my basement. I have it framed. (One 17' wall) My plan is to move one cabinet and knock a hole in the will of existing loading room for access to this new room. I want drenches all around the walls. Narrow, like a lab room, as the room is only 10' wide. My hope is to gain a dedicated cleaning area (Cabinets/shelving above) and another progressive/ test load, loading bench.
I just need the drive to finish... told myself last winter was the time... I was very busy at work and when I got home, I was out of "gas".
CW
NRA Life member • REMEMBER, FREEDOM IS NOT FREE its being paid for in BLOOD.
Come visit my RUMBLE & uTube page's !!
https://www.RUMBLE.com/user/Cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
I started 200 .38 Specials for July 4th. Just 158 and 105 swc's and Bullseye.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Expecting some border jumpers, are you?
Tom
μολὼν λαβέ
Did I ever mention that I hate to trim brass?
I set up a set of Hornady 308 dies for a new 700ADL I got. Fought those for a couple of hours but finally got them right. Loaded up 20 rounds with BLC-2 and 20 rounds of H4895.
Last edited by RKJ; 06-27-2018 at 06:49 PM.
After a long day of work to unwind... De-primed 200 .357 Mag and wet tumbled them to start preparing for my new 357 lever rifle. Cast and pc'd 200 45 colt 255 gn boolits for my New Vaquero. Loaded 150 125gn plinking rounds of 38 spl.
Loaded up a few 30/30 rounds. I'll take them to the range the next time I go just to have something to shoot.
Tom
μολὼν λαβέ
Did I ever mention that I hate to trim brass?
I wet stretched a holster for a Colt Govt .380 until it fit my new Star BM. Fits good.
Hornady One Shot case lube was all I used to protect the pistol from the moisture- not a hint of rust in 2 days.
I need primers.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Severe storms in the area kept me from heading into the shed today.
Tom
μολὼν λαβέ
Did I ever mention that I hate to trim brass?
Cast around 300 Lee277 135 the other day. Checked and ran about half through the Lyman 4500. Tumbled the brass from the range the other day.
Chamfered & deburred 300 new Starline 44mag cases ( out of 1000 ) using my LYMAN CASE PREP EXPRESS. went really fast.
When I set that up behind my LYMAN motorized case trimmer I can trim, chamfer/deburr, ream & clean the primer pockets on more than 100 once-fired G.I. cases in less then an hour.
I HATE auto-correct
Happiness is a Warm GUN & more ammo to shoot in it.
My Experience and My Opinion, are just that, Mine.
SASS #375 Life
Used my recently purchased Dillon 550B to turn out 100 rounds of 9mm, it went fairly well considering I have 2 RCBS Piggybacks that I have been using for 15+ years and the silly Dillon press rotates the other way and has to be manually indexed. All in all a nice addition to the Reloading room especially for the 75 dollars I paid for it.
"Yes or no will almost always suffice as the answer"
NRA Life member • REMEMBER, FREEDOM IS NOT FREE its being paid for in BLOOD.
Come visit my RUMBLE & uTube page's !!
https://www.RUMBLE.com/user/Cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |