I am using devastators and crimping past the crimp groove being the boolit is too long and won't feed if load I load it at the crimp groove. I'm using the lee factory crimp die to crimp. I overcrimped it the other day and ended up with a lead ring or two that ended up in my fired casings from the outcome. I found the sweet spot for my four fifty bushmaster with a crimp of .474" which holds my cast lee 300 in place past the crimp groove and is consistent enough to shoot a hair over MOA at a 100 yards. Can anyone tell me what diameter crimp that have had success with for the 44 mag? I'd like to settle on a crimp diameter size and roll with it instead of just crimping by eye every time so I can get some better consistency